Converting FogLights into Driving lights.....
#1
Scooby Regular
Thread Starter
I know it's probably been done to death, but is there any way of converting the fogs to come on with High Beam?
I'm in the process of changing the bulbs in the normal/side lights to decent ones and thought "what about the fogs?"
Any ideas??
Dan
I'm in the process of changing the bulbs in the normal/side lights to decent ones and thought "what about the fogs?"
Any ideas??
Dan
#2
Scooby Regular
It can be done easily, but why do you want to light up the road 15 feet in front of you on main beam - at speed, the fogs are about as much use as a handbrake on a jellyfish.......
#3
Scooby Regular
Thread Starter
Good point Dave!!!!
I suppose I'm trying to get P1 driving lights on the cheap!!!!
Would changing the foglight bulbs and re-angling the lights make a difference?
This is all in the persuit of some light when driving at night, and of course, I don't want to use the fogs (a la Max Power)......
Or am I p1ssing in the wind?
Ta Dan
I suppose I'm trying to get P1 driving lights on the cheap!!!!
Would changing the foglight bulbs and re-angling the lights make a difference?
This is all in the persuit of some light when driving at night, and of course, I don't want to use the fogs (a la Max Power)......
Or am I p1ssing in the wind?
Ta Dan
#4
Scooby Regular
Scooby doo
Be careful - the wind is getting up
A fog lamp reflector is designed so it has a wide flat beam with very little vertical height, and little forward reach.
Changing bulbs make no difference - the pattern/reach is dictated by the reflector.
It just will not work as an effective drive lamp.
Be careful - the wind is getting up
A fog lamp reflector is designed so it has a wide flat beam with very little vertical height, and little forward reach.
Changing bulbs make no difference - the pattern/reach is dictated by the reflector.
It just will not work as an effective drive lamp.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM