L33_WRX

Looking to buy a HID conversion kit but not sure what size I need for my 2002 WRX (buyeye) - can anyone help?

Cheers

L33_WRX

also does anyone know if a 02 wrx has any bulb out warning lights?

johnnyroper

if it is the standard lamps you will need h4 bulbs,if it is the twin lamp conversion type then i think they are h7
dont think they have got a bulb out warning light fitted

L33_WRX

Mine has the morrette conversion

Chelspeed

Down by your right knee there's a little lever, pull that which will release the bonnet. Open the bonnet. Pull the plug off the back of the bulb. Release the spring clip. Remove the bulb. Read the bulb type off the metal flange if you can't tell by looking at it.

Will be one of these here. Go Bulbs Available, View Bulbs by Fitting. It'll most likely be H1, H4 or H7.

H1 is the older style single filament bulb (ie dip or main but not both), it has a single small spade type terminal on the back and earths through the mounting ring. It'll be used if the outer light is dip only and the inner light is main only.

H4 is the dual filament bulb, easy to recognise as it has three spade type terminals on the back. It'll be used if the inner light is main only and the outer light is both dip and main.

H7 is the modern equivalent of the H1 I guess, single filament but two terminals on the back.

johnnyroper

as previous post pull a bulb out to double check,but i think the morrette conversion is h7 bulbs

L33_WRX

Cheers people - I was just asking for quickness