MORETTE - HELP NEEDED PLEASE
#1
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: GOOLE, EAST YORKSHIRE
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
MORETTE - HELP NEEDED PLEASE
HI, JUST FITTED A PAIR OF MORETTE HEADLIGHTS TO MY CAR. MY02. ONLY THING IS THAT THE BONNET DOESNT SEEM TO WANT TO SHUT?
ANY IDEAS
THANKS
TRACY
ANY IDEAS
THANKS
TRACY
#5
Scooby Regular
Join Date: May 2000
Location: MY00,MY01,RX-8, Alfa 147 & Focus ST :-)
Posts: 10,371
Likes: 0
Received 0 Likes
on
0 Posts
Any chance of posting up some shots of the installation? Trying to think how the Morette's could foul the bonnet.
Incidently - remove the caps lock. Stops people thinking you're SHOUTING
Chris
Incidently - remove the caps lock. Stops people thinking you're SHOUTING
Chris
#6
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: GOOLE, EAST YORKSHIRE
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
hi,
thanks for response. there seems to be some foam sponge ontop of the lights that touch the bonnet when trying to close. - is this normal - or shouldnt it be there?
tracy
x
thanks for response. there seems to be some foam sponge ontop of the lights that touch the bonnet when trying to close. - is this normal - or shouldnt it be there?
tracy
x
#7
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: GOOLE, EAST YORKSHIRE
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
THIS IS THE PICI
http://i79.photobucket.com/albums/j1...Photo-0031.jpg
THE left hand side is the one i have the problem with
http://i79.photobucket.com/albums/j1...Photo-0031.jpg
THE left hand side is the one i have the problem with
Trending Topics
#10
I had a similar problem on a MY04 with genuine Scoobie acessory morette type lights. It just touched the bonnet enough to stop it sitting right.
Couldn't see what was touching so painted snopake on the bits that looked like they might touch and drove round for a day. That night you could see what was touching as the snopake was rubbed off. It was a sort of flange on the mounting bit. Sliced a chunk off with a scalpel and it's been OK for the last two years.
Couldn't see what was touching so painted snopake on the bits that looked like they might touch and drove round for a day. That night you could see what was touching as the snopake was rubbed off. It was a sort of flange on the mounting bit. Sliced a chunk off with a scalpel and it's been OK for the last two years.
#12
Scooby Regular
Join Date: Mar 2006
Location: Guernsey
Posts: 1,441
Likes: 0
Received 0 Likes
on
0 Posts
Just had the same fitted to my '01 WRX, looking at your pic, it seems like mine sit slightly further forward, stick out more as it were, but not by much. It's hard to tell from a piccie. If you want photo of mine, let me know and I'll get some in the daylight.
Thread
Thread Starter
Forum
Replies
Last Post
robbie1988
Wanted
2
13 September 2015 09:25 AM
Scooby-Doo 2
Wheels And Tyres For Sale
1
09 September 2015 06:51 PM