Headlight adjustment MY00
#1
Headlight adjustment MY00
Can anyone tell me how to adjust the height of my headlights pls??
seem really low, and the switch on the dash is set to its highest postion
cheers
seem really low, and the switch on the dash is set to its highest postion
cheers
#3
Scooby Regular
not quite where i thought, just above where radio panel should be, to the right of the 'bright' switch, in the highest position, but bear in mind the head lights are crap as standard on classics
#5
Scooby Regular
iTrader: (2)
Look at the rear of the heaqdlights, there are two electrical adjusters, one for each side. On those is a nut, IIRC, or an Allen headed bolt, which you can turn to adjust the lights.
Sorry, mine have been Morettes for so long now, I cant recall exactly how to do it, or which way to turn the bolt head......I only know3 it's easier than on Morettes
Before fiddling with these:
1) ensure electrical adjusters are working: shine lights on garage door and operate, check.
2) ensure headlights are fixed properly to car, seated properly.
3. ensure bulbs are seated properly.
Alcazar
Sorry, mine have been Morettes for so long now, I cant recall exactly how to do it, or which way to turn the bolt head......I only know3 it's easier than on Morettes
Before fiddling with these:
1) ensure electrical adjusters are working: shine lights on garage door and operate, check.
2) ensure headlights are fixed properly to car, seated properly.
3. ensure bulbs are seated properly.
Alcazar
#6
Scooby Regular
Join Date: Feb 2004
Location: Maidenhead, Berkshire
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Had to fiddle with my off-side headlamp today, after my brother-in-law was able to explain why people kept flashing me lately. Following him home one night, "Are you trying to light the night sky..?" he asked.
After a quick peek here on SN, I found the adjusters and did the necessary. Thought some pics might be useful for future searchers.
Off-side adjuster (plastic pipework should be removed to gain better access);
http://www.sopertek.co.uk/scooby/pic...y00_os_far.jpg
Off-side close-up shot;
http://www.sopertek.co.uk/scooby/pic...st_my00_os.jpg
Near-side shot;
http://www.sopertek.co.uk/scooby/pic...st_my00_ns.jpg
If ever these pics/links don't work, contact me direct and I'll check it out or email them over.
Jonts.
After a quick peek here on SN, I found the adjusters and did the necessary. Thought some pics might be useful for future searchers.
Off-side adjuster (plastic pipework should be removed to gain better access);
http://www.sopertek.co.uk/scooby/pic...y00_os_far.jpg
Off-side close-up shot;
http://www.sopertek.co.uk/scooby/pic...st_my00_os.jpg
Near-side shot;
http://www.sopertek.co.uk/scooby/pic...st_my00_ns.jpg
If ever these pics/links don't work, contact me direct and I'll check it out or email them over.
Jonts.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM