nik52wrx

As above, how easy is it to the untrained mechanic ?
Car an my02 bugeye.
Any advice appreciated.
Nik.

albob

theres an installation guide here -
http://www.ravensblade-impreza.com/m...e/morette.html

Its for the classic, but shud give u some idea of whats involved

alan

nik52wrx

Thanks for the massive respnse from a web site dedicated for Scooby owners!

Looks like i'll have to take my chances

Cheers technical lighting section etc etc , dont give up the day jobs!
Can't believe i'm the onlt one to fit morette's to a newage!

alcazar

iTrader: (2)

Tried a search? I'd help, but only have experience of fitting to a classic. The actual fitting is easy, instructions are very good, the wiring IS different for the new age, but there HAVE been wiring diagrams posted on here, also I think the morette instructions are OK in this regard too.

SNTBAH.

Alcazar

phelpsa

It is extremely easy as long as you have a 10?mm spanner! I've never installed morettes but I can take the front of a bugeye apart in 10mins.

Unclip grill
Unclip little pannels between headlight and grill (a flat screwdriver is useful for both)
Unbolt headlights (3 bolts on each headlight, very obvious)
Pull headlight out
Unclip wiring
Clip wiring into Morettes
Push morettes into place
Bolt back in
Clip grill back in

Hope that helps

Adam

ajscooby

I have a 02 Impreza STI with Morette's fitted. If you get stuck, gimme a shout and I will take pics from the inside, which might help ya. The lights are pretty easy to remove when changing bulbs etc. Just let me know.