MattyC

Have seen few scoobs about lately when flashing/waving at them, who's fog lights flash with the main beam. Hows this done looks awsome? Surely if you bridge the relay controll lines together, the main beam would come on when you switch on the fogs, Not good if its foggy!!

Beastie

iTrader: (2)

Probably the scoobs you have seen have driving lights and not foglights. However if you connect a live feed from your full beam to your foglight relay then they will come on with full beam and bypass the foglight switch. They will still also come on with the foglight switch if switched on manually.
Think about it.

ALi-B

iTrader: (1)

As above probably driving light conversion.

But you can bridge the relays together and use a Diode in the wire between the foglamp and main beam relays so the foglamp switch won't turn on the main beam.

Beastie

iTrader: (2)

Ali
Good point

Dave uk blue mica

i've got a driving light conversion on mine, best thing i ever done cos crystal fogs are like candles in the wind!!!

MattyC

Got to dig out a couple of schotcy diodes me thinks, Any idea where fog relays are located? finding the head light ones not a prob as have morette conv so relays bolted on back of them! will have to get missus to keep pressing the fog light button till i suss out where relay is lol.

Chelspeed

New age fog light relay is fourth one down on a block of five or six relay sockets clipped onto the left hand side of the main fuse box by your right knee.