Rear Fog Light Conversion
#1
Rear Fog Light Conversion
I need to do the above to my Classic JDM STI before its test. It currentlyhas nothing, no light or switch.
What do I need to get and from where and whats the best way of going about this.
Thanks in advance.
What do I need to get and from where and whats the best way of going about this.
Thanks in advance.
#2
Scooby Regular
If the rear light units are the same as my UK car, there's a spare hole for a bulb holder. Fit one, or one each side, and wire to a switch. The standard swtch takes power from both heads & fogs via a pair of diodes so that the rear fogs come on whichever of the front lights are on.
Don't forget you will need a warning light somewhere.
John
Don't forget you will need a warning light somewhere.
John
#3
Scooby Regular
iTrader: (4)
I needed to do this for my RA import before the SVA,. I bought some UK light clusters as the regulations are quite strict as to where the light must be sighted. If you use a pair of UK clusters all is ok.The switch needed to be illuminated and visible from the drivers seat.I took a feed off the cigarette lighter, didn't need to wire it in any special way. " Fog light on, fog light off" test passed.
Regards
Andrew
Regards
Andrew
Thread
Thread Starter
Forum
Replies
Last Post