Please help with Light Prob....Alcazar needed.
26 March 2005, 09:18 AM
#1
Scooby Regular
Thread Starter
Join Date: Jun 2003
Location: Stevenage
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
Please help with Light Prob....Alcazar needed.
08 April 2005, 08:23 PM
#3
Agree with big500: I'd suspect the ballast, myself.
Is it possible to move the ballast from the side that ISN'T working, and plug it into the side that IS working, leaving the working LAMP where it is, ie: ONLY move the ballast?
If it is, and the problem persists, contact Autolamps online for a quote for a new ballast.
I'd also reinforce the bit about being VERY wary of the OUTPUT side of the ballasts: 25kV is not to be messed with
Alcazar
Is it possible to move the ballast from the side that ISN'T working, and plug it into the side that IS working, leaving the working LAMP where it is, ie: ONLY move the ballast?
If it is, and the problem persists, contact Autolamps online for a quote for a new ballast.
I'd also reinforce the bit about being VERY wary of the OUTPUT side of the ballasts: 25kV is not to be messed with
Alcazar
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Phil3822
General Technical
0
30 September 2015 06:29 PM