HOW DO YOU GET BUGEYE HEADLIGHTS OUT
#1
HOW DO YOU GET BUGEYE HEADLIGHTS OUT
CAN SOMEONE PLZ PLZ HELP ME,I WANTING TO DE-TANGO MY BUGEYE HEADLAMPS SO OFF I WENT I UN SCREWED THE TOP BOLT AND THE 2 ON THE FRONT, THE HEADLAMP WAS SLACK ON THE SIDE WERE THE 2 BOLTS CAME OUT OF BUT AS I TRYED TO PULL THE LIGHT OUT IT JUST WOULDN'T COME OUT ITS AS IF THERE WAS ANOTHER BOLT OR SOMTHING I EVEN TRYED TAKING THE SIDE INDICATOR AT THE FROM OUT AND HAD A LOOK TO SEE IF ANYTHING WAS STOPPING IT BUT NO JOY SO I JUST SCREWED THE HEADLAMP BACK IN PLZ PLZ SOMEONE HELP AS I NEED THOSE HORRIBLE ORANGE INDICATOR LENSES GONE
Trending Topics
#8
Scooby Regular
Join Date: Jan 2003
Location: Perthshire
Posts: 1,190
Likes: 0
Received 0 Likes
on
0 Posts
Take all the plugs off the back, then the two bolts and then...........pull the bugger off.
Its sitting into a funny little clip that locates it.
Trust me , its easy
I just pulled it off with my hands, no levers needed
(no jokes about me pulling pls!)
Its sitting into a funny little clip that locates it.
Trust me , its easy
I just pulled it off with my hands, no levers needed
(no jokes about me pulling pls!)
Last edited by HI SOOB; 31 January 2005 at 10:18 PM.
#9
Scooby Regular
Join Date: Jan 2003
Location: Perthshire
Posts: 1,190
Likes: 0
Received 0 Likes
on
0 Posts
I put one hand behind the light and one infront and just pushed on the back of it.
Take care not to bash it off the bumper when it pops free.
Also remember the plugs need to come off
Take care not to bash it off the bumper when it pops free.
Also remember the plugs need to come off
#10
CHEERS HI SCOOB
SO ITS JUST 2 FONT BOLTS AND 1 TOP BOLT AND ALL THE PLUGS OUT OF LIGHT AND PULL
AND YOUR SURE THERE IS NO MORE CLIPS OR BOLTS TO LOOSEN
OH DO YOU RECOMMEND PUTTING THE LIGHTS IN THE OVEN AS I WAS JUST GONNA WARM THEM UP WITH A HAIRDRYER IF PUTTING IN OVER WHAT SETTING SHOULD THEY BE ON AND FOR HOW LONG AND LIKE I SAY THANX AGAIN
SO ITS JUST 2 FONT BOLTS AND 1 TOP BOLT AND ALL THE PLUGS OUT OF LIGHT AND PULL
AND YOUR SURE THERE IS NO MORE CLIPS OR BOLTS TO LOOSEN
OH DO YOU RECOMMEND PUTTING THE LIGHTS IN THE OVEN AS I WAS JUST GONNA WARM THEM UP WITH A HAIRDRYER IF PUTTING IN OVER WHAT SETTING SHOULD THEY BE ON AND FOR HOW LONG AND LIKE I SAY THANX AGAIN
#11
Scooby Regular
Join Date: Jan 2003
Location: Perthshire
Posts: 1,190
Likes: 0
Received 0 Likes
on
0 Posts
Never De tangod a set im afraid.
I have sti lamps
Try boiling hot water too. Did this with my classic when i had to split the glass from plastic.
Not want a set of STI lamps?? £400??
Good luck anyway
I have sti lamps
Try boiling hot water too. Did this with my classic when i had to split the glass from plastic.
Not want a set of STI lamps?? £400??
Good luck anyway
#13
Scooby Regular
Join Date: Dec 2004
Location: weymouth
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
Somebody did a thread about not needing to bake the headlights, simply break up the orange dome with a pair of long-nose pliers and the bits shake out of the hole ( sounds easy but I cheated and bought de-tangoed ones he-he )
#18
This is for MY03 headlings but its pretty similar
http://bbs.scoobynet.co.uk/showthread.php?t=261820
http://bbs.scoobynet.co.uk/showthread.php?t=261820
Thread
Thread Starter
Forum
Replies
Last Post