Where's the ECU?
#1
Scooby Regular
Thread Starter
Join Date: Jun 2002
Location: Perth, Western Australia
Posts: 1,866
Likes: 0
Received 0 Likes
on
0 Posts
Where's the ECU?
In a MY99 turbo? The in-law's adding a rally timing device and needs to connect to the speedo somehow.
Anyone help?
TIA
Mark
Anyone help?
TIA
Mark
#2
Scooby Regular
Join Date: Mar 2002
Location: High Wycombe BUCKS
Posts: 2,288
Likes: 0
Received 0 Likes
on
0 Posts
in ansa to the thread title the ecu is situated under a metal cover in the front passenger footwell
Pull the carpet from the very front under the back of the glove box undoing the 2 retaining clips either side then with a 10mm socket removethe bolts of the retaining plate and ther you have it
Hope this helps
Pull the carpet from the very front under the back of the glove box undoing the 2 retaining clips either side then with a 10mm socket removethe bolts of the retaining plate and ther you have it
Hope this helps
#3
Scooby Regular
Thread Starter
Join Date: Jun 2002
Location: Perth, Western Australia
Posts: 1,866
Likes: 0
Received 0 Likes
on
0 Posts
Gossy: Cheers chap
Next question is where's the speed sensor wires. Looking at the ECU there's 3 multiplugs; black, grey and blue. Do you know, or have a pin out diagram for an ECU on a MY99?
Cheers
Mark
Next question is where's the speed sensor wires. Looking at the ECU there's 3 multiplugs; black, grey and blue. Do you know, or have a pin out diagram for an ECU on a MY99?
Cheers
Mark
#4
Scooby Regular
Thread Starter
Join Date: Jun 2002
Location: Perth, Western Australia
Posts: 1,866
Likes: 0
Received 0 Likes
on
0 Posts
Reckon we've identified the right plug just need to isolate the speed sensor wire. Documentation we have refers to B135 pin 24. Does this help?
TIA
Mark
TIA
Mark
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM