Please HELP with Knocklink Fitting
#1
Scooby Regular
Thread Starter
Join Date: Jun 2004
Location: Fife, Scotland
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Please HELP with Knocklink Fitting
Please help me regarding above I have fitted my Knocklink to a MY95 WRX Import. But I'm not sure exactly where to fit the Bosch Knock sensor onto my Engine.
I Tried Fitting it going by this picture but this must be a newer model cause I can't find this bolt on my engine http://www.stefanostadal.homedns.org...ods_gauges.htm
Please Please Help me as I want to get this working.
I have the Red wire Tapped into my Ignition, Black to an Earth point Behind my radio, The Brown wire into Pin 1 on The Bosch Sensor and The Black wire into Pin 2 on The Bosch Sensor.
I Have Fitted the sensor to a Threaded Bolt Hole on Top of the Engine Just Past the Bell Housing on the Passenger Side.
I Tried Fitting it going by this picture but this must be a newer model cause I can't find this bolt on my engine http://www.stefanostadal.homedns.org...ods_gauges.htm
Please Please Help me as I want to get this working.
I have the Red wire Tapped into my Ignition, Black to an Earth point Behind my radio, The Brown wire into Pin 1 on The Bosch Sensor and The Black wire into Pin 2 on The Bosch Sensor.
I Have Fitted the sensor to a Threaded Bolt Hole on Top of the Engine Just Past the Bell Housing on the Passenger Side.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
blockhead
Subaru Parts
19
07 November 2015 11:50 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM