Headlamp adjustment instructions - MY00
#1
To save anyone else the bother in future..
On an MY00, if you look at the wing end of the back of the headlights, you will see a long screw pointing up towards you with a combined 8mm plus Phillips head.
Anticlockwise to raise, clockwise to lower (the range of adjustment is hooge!).
The horizontal adjustment is the obvious adjuster pointing backwards from the top of the h/lamp housing. Don't know which way doeswhat as they didn't need moving.
On an MY00, if you look at the wing end of the back of the headlights, you will see a long screw pointing up towards you with a combined 8mm plus Phillips head.
Anticlockwise to raise, clockwise to lower (the range of adjustment is hooge!).
The horizontal adjustment is the obvious adjuster pointing backwards from the top of the h/lamp housing. Don't know which way doeswhat as they didn't need moving.
#3
If you've tried adjusting it, does it improve the crappy dipped beam much? I'll give it a go this weekend anyway and hopefully I'll be able to see more than 20ft ahead at night!
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Flat4x4-again
General Technical
2
29 September 2015 06:32 PM