damaged loom on driverside
#1
Scooby Regular
Thread Starter
Join Date: May 2003
Location: ireland
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
I'm in the process of securing the wiring back into position on my '95 wrx. It was pulled clear of the front panel and inner wing (driver/side) to allow crash repairs to front corner (d/side). Maybe someone can check/confirm a few things for me.
I have the loom secured to the inner wing again, and across the bottom of the new front panel. A bunch of wires branch off the main loom around the area of the d/side headlamp.
Some of these wires have broken connectors etc from the collision.
As well as the horn(2 wires) and headlamp (3 wires) what else should be fed through the hole in the inner wing into the engine bay, and which wires should stay outside.It's easier if I know now before I fit the wing.
Can anyone confirm the wire colours for the indicator, and parking lamp.
cheers.. Danc
I have the loom secured to the inner wing again, and across the bottom of the new front panel. A bunch of wires branch off the main loom around the area of the d/side headlamp.
Some of these wires have broken connectors etc from the collision.
As well as the horn(2 wires) and headlamp (3 wires) what else should be fed through the hole in the inner wing into the engine bay, and which wires should stay outside.It's easier if I know now before I fit the wing.
Can anyone confirm the wire colours for the indicator, and parking lamp.
cheers.. Danc
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM