Red / Clear rear lens
28 July 2003, 11:05 PM
#1
Scooby Regular
Thread Starter
Join Date: Dec 2000
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
What is the best way to incorporate a fog light into these units?
Can they be adapted to house the light in the same place as the UK ones or use one of the reversing lamps although I'd prefer to keep these as they are.
Any info appreciated.
Cheers
Neil
[Edited by Jonesy - 7/28/2003 11:21:28 PM]
Can they be adapted to house the light in the same place as the UK ones or use one of the reversing lamps although I'd prefer to keep these as they are.
Any info appreciated.
Cheers
Neil
[Edited by Jonesy - 7/28/2003 11:21:28 PM]
01 August 2003, 09:30 PM
#2
Scooby Regular
Join Date: Sep 2002
Location: midlands
Posts: 1,435
Likes: 0
Received 0 Likes
on
0 Posts
I got cracked offside uk one from scrapyard. cut off boss for foglight. drilled hole in sti one on flat section and glued boss in place. use two wires off uk light connector and fit into sti connector. it all then fits to standard loom.
hope this helps ...ken
hope this helps ...ken
02 August 2003, 09:19 AM
#3
Scooby Regular
Join Date: Oct 2002
Location: At Tescos Filling Up With 99 Octane!!!
Posts: 4,313
Likes: 0
Received 0 Likes
on
0 Posts
I just drilled a large hole into the flat bit then made it the right shape for a bulbholder with a dremel the wired it in and away you go.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM