Oxygen sensor wiring
#1
'ello all,
Could someone please tell me what the four wires are for and if they should be wired colour-colour onto the harness or how they should be wired?
Grey
White
White
Black
Thanks in advance.
Could someone please tell me what the four wires are for and if they should be wired colour-colour onto the harness or how they should be wired?
Grey
White
White
Black
Thanks in advance.
#2
the four wires are for live, trigger, trigger, earth. the 2 whites are the triggers and can go either way round, the other 2 must be right. If you buy a universal 4-wire sensor from eg the factors, the colors will be different for the live and earth but there should be a diagram inclosed.
#3
Thanks, was fitted by a dealer but they don't seem to be able to get the CEL to stay off. Was wondering if they just wired it wrong.
At the moment they have it:
Sensor Harness
Grey Black
White, white White
Black Grey
If they have put earth to live what would the symptoms be? 0 reading? Fried sensor?
At the moment they have it:
Sensor Harness
Grey Black
White, white White
Black Grey
If they have put earth to live what would the symptoms be? 0 reading? Fried sensor?
#4
if its wired the wrong way it just will not work. you will not damage the sensor. FYI i will tell you what does tho, Spraying penetrating oil on it, some mechanics do this to ease installation..
#6
scratching me brain here..i know if a sensor is shorted out it can still pulse on the triggers wires and not bring the light on, but if wired wrong way with no pulse - not sure on effect.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM