Turbo Timer Installation re: Speed/RPM wiring
#1
I want to install an HKS Turbo Timer in my MY03 WRX. Could someone please tell me where I can connect the RPM and Speed sensor wires. I would prefer to stay away from the ECU pins, but if this is the only option then I will do it. I got the MY02 pinouts, but the wiring colours they mention don't match. Which pins / wires should I use, and how do I test to make sure I have the right ones?
Thank You
Michael
Thank You
Michael
#4
Scooby Regular
I only have experience with my MY97, but on the PCB is printed TA and SP next to a couple of the screws holding the flexible PCB in place.
I used these for the Defi speed/revs display.
Just used the screw with a ring tag underneath.
TA = revs
SP = Speedo
Theres also a + and - there too
Hope that helps.
Iain.
I used these for the Defi speed/revs display.
Just used the screw with a ring tag underneath.
TA = revs
SP = Speedo
Theres also a + and - there too
Hope that helps.
Iain.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
blockhead
Subaru Parts
19
07 November 2015 11:50 PM