Hawkey Headlamp Level Wiring Faultfinding
#1
Scooby Regular
Thread Starter
Join Date: Nov 2011
Location: auchenblae
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Hawkey Headlamp Level Wiring Faultfinding
I have replaced a physically damaged rear suspension sensor for the headlight leveling but the yellow warning light for the headlamp leveling on the dash is still lit and I have initialised and reinisialised the system.
No joy in the warning light going out
Trying to trace a possible wiring fault but the procedure I downloaded only shows the rear wiring to the behing glovebox ecu and misses out a good few wires to the front suspension sensor. That are there on the ECU socket connector.
Therefore can anyone point me to the relevent section hopefully online for the wiring diagram and fault finding procedure for a 2006 Hawkeye auto headlight leveling.
Thanks
eddie
No joy in the warning light going out
Trying to trace a possible wiring fault but the procedure I downloaded only shows the rear wiring to the behing glovebox ecu and misses out a good few wires to the front suspension sensor. That are there on the ECU socket connector.
Therefore can anyone point me to the relevent section hopefully online for the wiring diagram and fault finding procedure for a 2006 Hawkeye auto headlight leveling.
Thanks
eddie
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM