stevie turbo

iTrader: (12)

hi i have a 05 blob eye just bought ive found the alarm overide keypad in the drivers side cubby hole but is there away of getting the code as i do not have,
i know i got one from someone before for my 99 classic on a forum there is a way /sequence to change it any one !!!!!!

Wyorksautoectrical

Hi mate, you can't retrieve the old code.
Do you have the one piece key with the 2 buttons on it.
Have you entered a number into the keypad more than 3 times ?
Does your keypad also have *# WXYZ (it must have all 6 of this list)

Wyorksautoectrical

If its the same as yours I will send you how to do it in a private message

forgedmarco

iTrader: (10)

Subaru will know the code if it's the original, otherwise there is a sequence to change it

stevie turbo

iTrader: (12)

no i have key with 1 button number pad with #* on it.
i changed the one on my 99 classic after many attemts tried the same code as on many threads just doesnt seem to work

Jamie1989

Massive thanks to Wyorksautoectrical. I didnt have the code to my 2005 blobeye either and with his instructions using a working keyfob I have now changed the code and its now working perfectly with my spare key. Cheers

Wyorksautoectrical

Jamie1989, that's good news.
You can also change the settings on these systems through the keypad: turning the bleep off, auto-locking etc.
Don't normally get time to come on here, but I'm off work at min cause I busted my arm and bored out of my brains.
If you need to know how to change any settings I will try find my list of how to do it, this can also be done through the sigma diagnostic machine, which the dealers have and charge a fortune for as they say it's the only way you can do it.... The liars.

stevie turbo

iTrader: (12)

any chance of helping me out !!!please

Wyorksautoectrical

Hi mate, you say you have the #, but if you haven't got WXYZ & the* keys on the keypad it won't work, I thought it was you I had replied to yesterday,but me being dumb it was somebody else with same prob.
I don't know another way if yours doesn't have the listed keys apart from using somebody with the sigma diagnostic machine.

stevie turbo

iTrader: (12)

just a thought but you asked if my pad has wxyz on my alarm key pad...! in my manual and reading many threads on here i dont know of any pads even my old classic,s didnt have that!and the manual refers to wxyz as where your code should be entered i have numbers and *#

Wyorksautoectrical

I will check again, and I also need to do the same on my motor, so I will get back to soon as poss,
Prob be after weekend as my motor is at my garage and I'm at home cause I bust my arm.
The WXYZ will double with the numbers : eg 1234, but let me double check,
Once you enter 3 wrong attempts on these there only supposed to lock up for 30 min but I had one what totally jammed up forever.

Adam Matthew Silver

Did this get anywhere? Just got an 02 blobeye eye with A keypad with *#1234567890. Got a key with 2 buttons and an immobiliser fob.

Thanks

MDS_WRX

iTrader: (1)

Arm then disarm using your working fob, then (within 30 seconds) type the following into the keypad:

*17856*92*aaaa*aaaa#

(change the aaaa to the new pin you want)

Wyorksautoectrical

Arm then disarm alarm with remote.
Within 30 seconds of disarming,type into the keypad-
*17856*92*1111#
Your new code is now : 1111
You should be able to disarm your alarm by putting : 1111
Where you enter 1111 this is just an example( put your own 4 digit number here).
How to change your code...................
Type into keypad: **
Type into keypad: your 4 digit number then *
Type into keypad: 92* then your new code, then * new pin code again then #
Just make sure you enter the (*) and the (#) exactly where I have put them.
If for any reason it won't do it ( had these sometimes) totally locked up due to wrong code numbers entered). There supposed to only lock up for 30 min!!
The only other way is to take your car to someone which as the sigma diagnostic machine.

Adam Matthew Silver

sweet. cheeers guys

stevie turbo

iTrader: (12)

still no joy 05 blob no code for overide

Aaron1978

iTrader: (12)

I've emailed you the full manual and codes in PDF.

stevie turbo

iTrader: (12)

hi thanks for that but i still require the 4 digit code for the overide to do any of that stuff,i do not have the stickers i need the over ride sequence if you have lost the code i cant get the above to work,i have changed the alarm beeps for arming and disarming ok,but when i do the *17586*92*1111# with the ign on and off it doesnt do it!!

Aaron1978

iTrader: (12)

Unlock your car and sit in it, arm then disarm your alarm, then enter the below into your keypad making sure the LED flashes after each press (don't leave it too long between each button press either)

*17856*92*wxyz*wxyz# where wxyz is your new PIN

stevie turbo

iTrader: (12)

all done cheers mate i was only putting in the wxyz once not the twice...thanks again

K3ogh_sti

Sorry for the hijack, my fob isn't working so can't lock or unlock the car with it, I've changed the battery etc no joy, so basically the immobilisor is stuck on any way I can override it without a fob? I have to run a live from the starter motor to the battery at the minute and it's doing my nut! Any ideas

stevie turbo

iTrader: (12)

have you not a working spare fob at all!
if not you need the code for the key pad unless you can get your fob working then you can overide the the alarm by changing pin number to your own..other than that its a trip to a alarm man or subaru..