daz4065

I have aproblem with the rear struts chattering. Only this time the car isn't under warranty and my head is seriously wrecked.

Can anyone advise me of a good brand of aftermarkets that are going to last?

I have tried greasing the struts and that worked for a few weeks but it is back and it is driving me to distraction.

Any help or advice on where to get this sorted would be very much appreciated.

dmc1980

godspeed or someone do an exchange, they have developed a fix for the rear struts, and you can exchange your old units, plus some cash for them.

Mine are away as well. was going to go donw this route, or was going to write to subaru and tell them my friends with evos dont have this problem and try and blag a replacement under warranty

dmc1980

sorry it was scoobyclinic and here is the thread

https://www.scoobynet.com/scoobynet-...ght=STI+Shocks

daz4065

I have heard that KYB do replacements and to the best of my knowledge they make the subaru ones. Wonder can anyone confirm that??

daz4065

Any suggestions where to buy or part numbers for after market struts?

gojonnyjo

iTrader: (1)

Daz
try ISDC web site, there are a few traders on there, and ya can actually get it a wee bit cheaper when converting to Euro, got my hks dump valve new for about 220 quid,

was thinkin of going tien street coil overs my self

gojonnyjo

iTrader: (1)

dmc

wot happens to the rear shocks, mine are ok at the mo, but just wanting to know wot to look out for...

dmc1980

they start to knock. you will just hear a knocking noise coming from the year. i dont think it causes any problems, its just bloody annoying!

daz4065

The knock is driving me insane. I cannot stick it much longer. Gonna get some rear struts sorted. The guys at subaru described it as chattering and that really is what it is. Low speed annoying chattering.

Will have to get onto the ISDC site.

GT Scooby blue

iTrader: (14)

Stevie try Motoglass on the Boucher Road, the KYB shocks that I got originally were supplied by them ( found their receipt under the tape)and then sent to a local accessories shop,so I reckon they might be cheaper than most other suppliers.

daz4065

many thanks. will give them a shout and see if i can get a hold of them.

Were they difficult to fit? Do you know if you need to set up geometry etc once fitted?

Cheers

GT Scooby blue

iTrader: (14)

Geometry shouldn't need setting up as its only a straight swap.
It took about 4 hours altogether but I get sidetracked very easily