fitting a steering uprated wheel/boss to a 1996 type r problem
#1
fitting a steering uprated wheel/boss to a 1996 type r problem
Has anyone had issues fitting a steering uprated wheel/boss (omp) to a 1996 type r?
Fit the boss and wheel but on the final 1/4 turn to do the centre nut tight the steering is heavy to turn, release the pressure from the nut and can turn steering as normal.
Its like something is being squashed but cannot see what.
Any ideas?
Cheers
Fit the boss and wheel but on the final 1/4 turn to do the centre nut tight the steering is heavy to turn, release the pressure from the nut and can turn steering as normal.
Its like something is being squashed but cannot see what.
Any ideas?
Cheers
#3
Scooby Regular
iTrader: (1)
Join Date: May 2007
Location: Scotland
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
Try adding an extra washer under the nut.
My original boss/wheel had 2 washers, i mis-placed 1 of the washers when changing for an OMP boss/wheel, when i found the washer and re-fitted it the steering was lighter (back to normal).
My original boss/wheel had 2 washers, i mis-placed 1 of the washers when changing for an OMP boss/wheel, when i found the washer and re-fitted it the steering was lighter (back to normal).
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
matt12
ScoobyNet General
64
16 September 2015 09:16 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM