got all senders ect but no instructions and im crap at wiring, anyone got any pointers ive got oil temp and oil presure and boost, boost ive done

 

If you got them new you should of had instructions.

If they are the same as mine then iirc the orange and white wires are to change the colour of the gauge when you put you lights on, black is earth and red is power.

 

i mean fitting the senders ect

 

if you give me a few moments ill post up ther instructions if that helps?
I fitted set of prosports few weeks ago feel free to ask any questions...

Are you going to be running a sandwhich plate or remote t-piece and replacement cylinder no.3 cover bung?

 

its not a sandwhich palte i no that much but im crap with things like this, its got some senders ill post pics up!

 

Boost can be "T`d" off the manifold or dump valve.

Oil pressure sensor goes under the Alternator in place of the factory oil pressure switch, Depending on the size of the sensor you might have to relocate it(Search for `Subaru Remote Oil` On ebay)

Oil Temp goes into the top of the block above No.3 cylinder, If you look down between the turbo and intercooler you will see a plug with an 8MM allen key hole, It goes there.

 

may i suggest you have a read through here and decide whether u think ur up to it
https://www.scoobynet.com/interior-1...and-boost.html

 

oil pressure sender hole is under the alternator, oil temperature sender,you need to remove blanking plug from cylinder 3(under left hand side of the intercooler when looking from the front.)
boost gauge you can fit just before dump valve in the vacuum pipe.

 

Holy thread revival batman!

 

im going to try fit them tommorow

 

What a whole 2 weeks