Prosport gauge fitting help.
#1
Scooby Regular
Thread Starter
Join Date: Sep 2009
Location: Sunderland
Posts: 338
Likes: 0
Received 0 Likes
on
0 Posts
Prosport gauge fitting help.
Finally my oil pressure and temp gauges arrived. Started to fit them and it went **** up from there.
There was already a T piece fitted as it had a mechanical pressure gauge fitted but it turns out the thread on the T peice is wrong so the 1/8 npt sender doesn't fit so i need an adaptor for that.
Now the oil temp Agin there was a mechanical gauge fitted so i planned on using the same location for the sensor and agian it wasn't even nearly the right size.
The problem is all the adaptors i have seen are for 1/8 npt but the sensor isn't has anyone encounted this before?
There was already a T piece fitted as it had a mechanical pressure gauge fitted but it turns out the thread on the T peice is wrong so the 1/8 npt sender doesn't fit so i need an adaptor for that.
Now the oil temp Agin there was a mechanical gauge fitted so i planned on using the same location for the sensor and agian it wasn't even nearly the right size.
The problem is all the adaptors i have seen are for 1/8 npt but the sensor isn't has anyone encounted this before?
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
blockhead
Subaru Parts
19
07 November 2015 11:50 PM