6 point harness fitting - opinions
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: In a WRX STi Spec C Type RA
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
6 point harness fitting - opinions
It appears that most who use harnesses mount the shoulder straps down to the existing anchor points behind the rear seats.
Is there any reason why the shoulder straps can't be fitted via eye bots and a backing plate to the rear parcel shelf? thus keeping the straps level and not at a tight angle.
Not bothered about loosing the back seats or cutting into the parcel shelf
I'm using the harnesses with a fixed back bucket seat.
the lap straps will be fitted back to the side mounts and the crutch straps to a bar underneath the seat.
thoughts appreciated
Cheers
Rob
Is there any reason why the shoulder straps can't be fitted via eye bots and a backing plate to the rear parcel shelf? thus keeping the straps level and not at a tight angle.
Not bothered about loosing the back seats or cutting into the parcel shelf
I'm using the harnesses with a fixed back bucket seat.
the lap straps will be fitted back to the side mounts and the crutch straps to a bar underneath the seat.
thoughts appreciated
Cheers
Rob
Thread
Thread Starter
Forum
Replies
Last Post
ATWRX
Full Cars Breaking For Spares
88
01 February 2016 07:28 PM
blockhead
Subaru Parts
19
07 November 2015 11:50 PM
domu
ScoobyNet General
7
03 October 2015 03:46 AM
matt12
ScoobyNet General
64
16 September 2015 09:16 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM