my03 > my05 dash
#1
my03 > my05 dash
Just a thought guy's
Has anyone done there own facelift on the centre dash to bring the 03/04 centre dash upto 05 spec?
Just looking for some imfo as to what's involved,are we talking just the fascia's clipping straight in or is the actual dash a differant shape/size etc
Also,will any mod's be needed for the air con/stereo area
cheers mark
Has anyone done there own facelift on the centre dash to bring the 03/04 centre dash upto 05 spec?
Just looking for some imfo as to what's involved,are we talking just the fascia's clipping straight in or is the actual dash a differant shape/size etc
Also,will any mod's be needed for the air con/stereo area
cheers mark
#2
I am doing that at this very moment
The actual dash moulding is the same......
You will need the complete centre console assembly inc. the gear surround; side panels etc.; the centre dash fascia with heater controls and switches; the centre panel which the fascia clips into; the centre vents; one metal bracket which secures the centre panels is different, as are the stereo side brackets; relocation of mirror switch.
The heater control panel wiring harness is the same!!
I've got a proper list with some part numbers and some pics. if you need them. It is an expensive, but worthwhile mod. IMHO.
PM me for more details if req.
The actual dash moulding is the same......
You will need the complete centre console assembly inc. the gear surround; side panels etc.; the centre dash fascia with heater controls and switches; the centre panel which the fascia clips into; the centre vents; one metal bracket which secures the centre panels is different, as are the stereo side brackets; relocation of mirror switch.
The heater control panel wiring harness is the same!!
I've got a proper list with some part numbers and some pics. if you need them. It is an expensive, but worthwhile mod. IMHO.
PM me for more details if req.
Trending Topics
#9
Originally Posted by V5-APS
I am doing that at this very moment
The actual dash moulding is the same......
You will need the complete centre console assembly inc. the gear surround; side panels etc.; the centre dash fascia with heater controls and switches; the centre panel which the fascia clips into; the centre vents; one metal bracket which secures the centre panels is different, as are the stereo side brackets; relocation of mirror switch.
The heater control panel wiring harness is the same!!
I've got a proper list with some part numbers and some pics. if you need them. It is an expensive, but worthwhile mod. IMHO.
PM me for more details if req.
The actual dash moulding is the same......
You will need the complete centre console assembly inc. the gear surround; side panels etc.; the centre dash fascia with heater controls and switches; the centre panel which the fascia clips into; the centre vents; one metal bracket which secures the centre panels is different, as are the stereo side brackets; relocation of mirror switch.
The heater control panel wiring harness is the same!!
I've got a proper list with some part numbers and some pics. if you need them. It is an expensive, but worthwhile mod. IMHO.
PM me for more details if req.
I saw your car a few weeks back at H&S and you could see where it was going with the the dash and it looked , specially liked the seats you had and a nice drive as well. When its finished are you going to put some pics up ??
VJ
#10
Scooby Regular
iTrader: (1)
Join Date: Jun 2000
Location: Essex
Posts: 2,818
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by V5-APS
I am doing that at this very moment
The actual dash moulding is the same......
You will need the complete centre console assembly inc. the gear surround; side panels etc.; the centre dash fascia with heater controls and switches; the centre panel which the fascia clips into; the centre vents; one metal bracket which secures the centre panels is different, as are the stereo side brackets; relocation of mirror switch.
The heater control panel wiring harness is the same!!
I've got a proper list with some part numbers and some pics. if you need them. It is an expensive, but worthwhile mod. IMHO.
PM me for more details if req.
The actual dash moulding is the same......
You will need the complete centre console assembly inc. the gear surround; side panels etc.; the centre dash fascia with heater controls and switches; the centre panel which the fascia clips into; the centre vents; one metal bracket which secures the centre panels is different, as are the stereo side brackets; relocation of mirror switch.
The heater control panel wiring harness is the same!!
I've got a proper list with some part numbers and some pics. if you need them. It is an expensive, but worthwhile mod. IMHO.
PM me for more details if req.
Where are you moving the mirror switch to ?
Allan
#12
OK Guys.....I'll put together the parts list today....must find all the invoices!!
I have also fitted the complete my06 STi Type RA black interior inc. the door panels
The mirror switches are different between the MY02-04 and the my05-06.
I cut and extended the wiring from the centre console into the drivers side door trim and put the old switch there, as on the 05-06 cars
Right, i'm off to get this list together.
I have also fitted the complete my06 STi Type RA black interior inc. the door panels
The mirror switches are different between the MY02-04 and the my05-06.
I cut and extended the wiring from the centre console into the drivers side door trim and put the old switch there, as on the 05-06 cars
Right, i'm off to get this list together.
Last edited by V5-APS; 24 February 2006 at 08:56 PM.
#13
Originally Posted by VJ_STi
V5-APS
I saw your car a few weeks back at H&S and you could see where it was going with the the dash and it looked , specially liked the seats you had and a nice drive as well. When its finished are you going to put some pics up ??
VJ
I saw your car a few weeks back at H&S and you could see where it was going with the the dash and it looked , specially liked the seats you had and a nice drive as well. When its finished are you going to put some pics up ??
VJ
Pics. will go up soon
#14
Scooby Regular
iTrader: (1)
Join Date: Nov 2001
Location: scoobypedia.co.uk
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by V5-APS
OK Guys.....I'll put together the parts list today....must find all the invoices!!
http://www.scoobypedia.co.uk/index.p...EyeDashUpgrade
-Steve.
#15
Here goes :
1 x 92112FE000OE Centre box assembly -
This is the armrest and lower centre console.
1 x 66203FE200 Reinf. Lower Compl
This is a metal bracket, replacing the current one, where the glovebox and centre inpane screw into.
1 x 66086FE000OE Centre Inpane
This is the panel where the stereo and heater control panel fit into.
1 x 92136FE000OE Cover R RHD
The part with the two cup holders, clips into Centre box assembly.
1 x 66063FE010OE
1 x 66063FE000OE
These are the front side panels of the console, fit into front of Centre box assembly.
1 x 92123FE300 - Boot Handbrake
Handbrake lever gaitor surround, clips into the bit with the 2 cup holders.
10x 904500025 Self tapping screws
2 x 909140024 Clips
6 x 66063FE010OE Clips for dashboard
The following i got from the breakers.....BUT, I will try to get the part numbers from my dealer for all interested parties.
Heater controls/Switches - original wiring loom plugs straight in.
Centre heater vents - These clip straight into original dash.your original black hazard switch can be re-used, (Although i have a few spare silver ones if req.)
Radio surround panel (Have a spare one of these too)
Gear lever gaitor and surround, with STi metal trim.
The radio mounting metal side brackets are different....the original can be modded to fit, but i changed mine....i don't have the part numbers for these though.
Hope this helps all of you......it WILL cost best part of £500 !!
I'll forward some pics. to crispyduck, so you can all view them there
Any further questions pls pm me and i will try to help.
1 x 92112FE000OE Centre box assembly -
This is the armrest and lower centre console.
1 x 66203FE200 Reinf. Lower Compl
This is a metal bracket, replacing the current one, where the glovebox and centre inpane screw into.
1 x 66086FE000OE Centre Inpane
This is the panel where the stereo and heater control panel fit into.
1 x 92136FE000OE Cover R RHD
The part with the two cup holders, clips into Centre box assembly.
1 x 66063FE010OE
1 x 66063FE000OE
These are the front side panels of the console, fit into front of Centre box assembly.
1 x 92123FE300 - Boot Handbrake
Handbrake lever gaitor surround, clips into the bit with the 2 cup holders.
10x 904500025 Self tapping screws
2 x 909140024 Clips
6 x 66063FE010OE Clips for dashboard
The following i got from the breakers.....BUT, I will try to get the part numbers from my dealer for all interested parties.
Heater controls/Switches - original wiring loom plugs straight in.
Centre heater vents - These clip straight into original dash.your original black hazard switch can be re-used, (Although i have a few spare silver ones if req.)
Radio surround panel (Have a spare one of these too)
Gear lever gaitor and surround, with STi metal trim.
The radio mounting metal side brackets are different....the original can be modded to fit, but i changed mine....i don't have the part numbers for these though.
Hope this helps all of you......it WILL cost best part of £500 !!
I'll forward some pics. to crispyduck, so you can all view them there
Any further questions pls pm me and i will try to help.
Last edited by V5-APS; 24 February 2006 at 08:55 PM.
#16
Scooby Regular
iTrader: (1)
Join Date: Nov 2001
Location: scoobypedia.co.uk
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by V5-APS
... I'll forward some pics. to crispyduck, so you can all view them there
#19
do you have all the parts buddy ?????
see link below for fitting guide(need to register to view pic's)
05 Center console in a 04 updated: COMPLETED WITH PICS & WRITE UP - IWSTI.com: Subaru STI Forums
cheers marcus
see link below for fitting guide(need to register to view pic's)
05 Center console in a 04 updated: COMPLETED WITH PICS & WRITE UP - IWSTI.com: Subaru STI Forums
cheers marcus
Last edited by ethanrob; 17 January 2008 at 05:15 PM.
#20
Supporting Member
iTrader: (28)
Bit late to be posting in this thread I know guys, BUT can you answer me this:
If I were to just try and swap the dials i.e the heater matrix controls that sit behind the surround rather than the whole lot - would this be a straight swap?
As I understand it the wiring looms are identical, it's just the dials are different....so if I were to get hold of the heater assembly that sits behind maybe I could swap em?
If I were to just try and swap the dials i.e the heater matrix controls that sit behind the surround rather than the whole lot - would this be a straight swap?
As I understand it the wiring looms are identical, it's just the dials are different....so if I were to get hold of the heater assembly that sits behind maybe I could swap em?
#21
Bit late to be posting in this thread I know guys, BUT can you answer me this:
If I were to just try and swap the dials i.e the heater matrix controls that sit behind the surround rather than the whole lot - would this be a straight swap?
As I understand it the wiring looms are identical, it's just the dials are different....so if I were to get hold of the heater assembly that sits behind maybe I could swap em?
If I were to just try and swap the dials i.e the heater matrix controls that sit behind the surround rather than the whole lot - would this be a straight swap?
As I understand it the wiring looms are identical, it's just the dials are different....so if I were to get hold of the heater assembly that sits behind maybe I could swap em?
they plug straight in(on the blobeye they do anyway,but im sure the bugeye has the same heater setup)_
marcus
#22
Scooby Regular
iTrader: (1)
Join Date: Jul 2006
Location: Portadown
Posts: 1,003
Likes: 0
Received 0 Likes
on
0 Posts
helpp
just done this swap onto my 02 bug, looks great, only prob is the fans work on or off, no variable speed, any ideas guys to fix this, anyone else came across this, the plugs and wires are the same, when i put the original controls back in they work as they should
#24
Scooby Regular
iTrader: (1)
Join Date: Jul 2006
Location: Portadown
Posts: 1,003
Likes: 0
Received 0 Likes
on
0 Posts
think ill get a lend of another set of controls and try it, the gater i just folded in up so that it looks a bit neater, wing mirror switch I have'nt sorted yet, milling around a couple of ideas, will get it sorted this weekend, will get pics up where i put it, dont want to cut into the consul
#25
Supporting Member
iTrader: (28)
think ill get a lend of another set of controls and try it, the gater i just folded in up so that it looks a bit neater, wing mirror switch I have'nt sorted yet, milling around a couple of ideas, will get it sorted this weekend, will get pics up where i put it, dont want to cut into the consul
#27
Scooby Regular
iTrader: (23)
Join Date: May 2006
Location: Rota Subzeros FOR sale!
Posts: 3,701
Likes: 0
Received 0 Likes
on
0 Posts
I've done the same to my bug and replaced the handbrake handle so using the oe gaiter out the hawkeye is all fine. In the process of making a custom gaitor too.
Ricey
Ricey
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM