STI Seats and Airbag Dash Light.
#1
Scooby Regular
Thread Starter
Join Date: Feb 2005
Location: Birmingham
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
STI Seats and Airbag Dash Light.
I have just fitted STI seats into my 05MY WRX, I now have the airbag light on the dash board lit constantly.
Am I correct in understanding that placing a resistor in the lead left under the seat will turn this off ??
And am I also correct in understanding the required resistor is a 3.3K Ohm ??
( Hope so as I took some from work the other day )
Cheers
Mark.
Am I correct in understanding that placing a resistor in the lead left under the seat will turn this off ??
And am I also correct in understanding the required resistor is a 3.3K Ohm ??
( Hope so as I took some from work the other day )
Cheers
Mark.
#4
Originally Posted by Scooby-Mark
I have just fitted STI seats into my 05MY WRX, I now have the airbag light on the dash board lit constantly.
Am I correct in understanding that placing a resistor in the lead left under the seat will turn this off ??
And am I also correct in understanding the required resistor is a 3.3K Ohm ??
( Hope so as I took some from work the other day )
Cheers
Mark.
Am I correct in understanding that placing a resistor in the lead left under the seat will turn this off ??
And am I also correct in understanding the required resistor is a 3.3K Ohm ??
( Hope so as I took some from work the other day )
Cheers
Mark.
#6
Scooby Regular
Thread Starter
Join Date: Feb 2005
Location: Birmingham
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sang_my02_wrx
that is correct. did mine, untill one of the resistrrs got dislodged, but a bit of insulated tape sorted it good and proper.
What value resistor did you use ??
I have now found people on here 3.3 ohm not 3.3K Ohm
I fitted the 3.3K Ohm ones I *cough* borrowed from work and the light didn't go out
Trending Topics
#8
Originally Posted by Scooby-Mark
Cheers for that,
What value resistor did you use ??
I have now found people on here 3.3 ohm not 3.3K Ohm
I fitted the 3.3K Ohm ones I *cough* borrowed from work and the light didn't go out
What value resistor did you use ??
I have now found people on here 3.3 ohm not 3.3K Ohm
I fitted the 3.3K Ohm ones I *cough* borrowed from work and the light didn't go out
i used 3.3ohm they need to be long legged
#9
Scooby Regular
Thread Starter
Join Date: Feb 2005
Location: Birmingham
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sang_my02_wrx
3.3k? never heard of that, but im not electronically minded...
i used 3.3ohm they need to be long legged
i used 3.3ohm they need to be long legged
Cheers for that though, I had been told the wrong value
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM