Guy's I wonder if you could help an old "fart" out, me and my friend have fitted some BF defi gauges and control unit, they look the "nuts", my question is how do you adjust the boost level as at the moment it is only set at 1 bar ? I would look in the little manuals but I left them round my friends house and he is now on holiday for 2 weeks !

Thanks for any replies

"MADDOG"

PS I have found a guy that makes Subaru seat covers

 

You cant adjust the boost level

the gauge is merely for telling you what boost level you are running

You need a boost controller to change the boost

 

Thank you *Sonic*, I will just buy myself some earplugs then, as the buzzing noise gets a bit much when it goes over 1 bar

regards "MADDOG"

 

AHh I see what you mean now

YOu mean the peak level

If I remember correctly, you just press the up & down arows and left & right to select the gauge, up & down arrows, will move the needle in tiny increments to the peak level you need

Steve

 

Thanks Steve, these things should not be sold to people over the age of 40 . Thank for your reply.

regards "MADDOG"

 

First you need to press the WARN button and then you can adjust the peaks with the arrows as detailed above

 

...........but make sure that the fastest flashing red light is on the boost first. Then press the up button to raise the warning level.

If the flashing red light on the boost isnt the fastest flashing light then press the warning button until it does so

thick middle aged git

 

Thanks once again guys, all done

regards "MADDOG"