TECHTOM
#1
Scooby Newbie
Thread Starter
Join Date: Jul 2001
Location: KC
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Does anybody know anything about the Techtom MDM100S2? It is a digital display for ECU data...kinda like 20 guages in one. I-Club is buzzing with interest.
[This message has been edited by aspera (edited 24 August 2001).]
[This message has been edited by aspera (edited 24 August 2001).]
#2
It takes readings from the ECU/sensors and displays them - nice stuff like ignition advance/retard (deg.), injector activity (ms), knock (on/off), and sensor readings from AFM (volts), O2 (volts)etc., etc.
Cheers.
Edit for spelling!!
[This message has been edited by AJbaseBloke (edited 22 August 2001).]
Cheers.
Edit for spelling!!
[This message has been edited by AJbaseBloke (edited 22 August 2001).]
#3
Scooby Regular
iTrader: (3)
Join Date: Dec 1999
Location: UK
Posts: 13,274
Likes: 0
Received 0 Likes
on
0 Posts
They are basically a cut down Select Monitor (Subaru diagnostic computer).
The unit can read from the standard sensors, but can't write. So you won't be able to reset the ECU, like the select monitor.
The unit is about the same size as a king size Mars bar, and it plugs into the standard socket under the steering wheel.
Additional sensors/alarms can be added to monitor and alert.
The only place I've seen them is at Power Engineering.
No connection, and not selling them, I just saw then and satisfied my curiousity!
Cheers
Andy
The unit can read from the standard sensors, but can't write. So you won't be able to reset the ECU, like the select monitor.
The unit is about the same size as a king size Mars bar, and it plugs into the standard socket under the steering wheel.
Additional sensors/alarms can be added to monitor and alert.
The only place I've seen them is at Power Engineering.
No connection, and not selling them, I just saw then and satisfied my curiousity!
Cheers
Andy
Thread
Thread Starter
Forum
Replies
Last Post