94WRX - Momo Steering wheel - Is it this simple?
#1
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Jun 2001
Location: Stalking Kate Beckinsale
Posts: 4,265
Likes: 0
Received 0 Likes
on
0 Posts
Hi folks. I am in need of advice. Getting 94WRX next week and I noticed that it had a Momo-style boss with a Nardi (can't remember) steering wheel. Just in straight from Japan. Want to bolt on Momo champion lying around. If it is the original boss from the car, will it fit straight on? Help appreciated!
Nick
[This message has been edited by Mr Footlong (edited 09 February 2001).]
Nick
[This message has been edited by Mr Footlong (edited 09 February 2001).]
#4
I thought the holes on momo wheels were slightly further apart than the Nardi wheel as I'm considering changing to the champion myself. If it does fit, could you please let me know so I don't waste money on a new boss
Cheers
[This message has been edited by Charlie H (edited 10 February 2001).]
Cheers
[This message has been edited by Charlie H (edited 10 February 2001).]
Trending Topics
#10
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Jun 2001
Location: Stalking Kate Beckinsale
Posts: 4,265
Likes: 0
Received 0 Likes
on
0 Posts
This is becoming hilarious..... Bought my car over 3 weeks ago and still isn't ready yet....
Actually detoured from a job on friday to check on car and saw it being resprayed. Told that it should be tuesday.....
Not getting my hopes up. Will definetly know by Thursday, as I have taken 2 days off just to play with her
Actually detoured from a job on friday to check on car and saw it being resprayed. Told that it should be tuesday.....
Not getting my hopes up. Will definetly know by Thursday, as I have taken 2 days off just to play with her
#11
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Jun 2001
Location: Stalking Kate Beckinsale
Posts: 4,265
Likes: 0
Received 0 Likes
on
0 Posts
Charlie,
Got her late this afternoon. Just looked at the Nardi and the bolts are in the same place, only might be slightly larger distance across the bolts. Will find out tomorrow morning....
Got her late this afternoon. Just looked at the Nardi and the bolts are in the same place, only might be slightly larger distance across the bolts. Will find out tomorrow morning....
#16
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Jun 2001
Location: Stalking Kate Beckinsale
Posts: 4,265
Likes: 0
Received 0 Likes
on
0 Posts
I hope the Momo does fit on there. I am cramped mildly in the cockpit as it is. The current Boss is quite compact. The Momo's ain't nearly as compact I don't know of any others. Most boggo standard manufacturers make them to the normal size, e.g Momo, Sparco, OMP etc.
#17
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Jun 2001
Location: Stalking Kate Beckinsale
Posts: 4,265
Likes: 0
Received 0 Likes
on
0 Posts
I have just fitted her directly onto the boss without any problems at all! A couple of things to make note of, though. You normally have a press in plate that the horn module presses into. I have had to leave that out, as it bulges out at the back of the wheel. The Nardi boss has a smaller open circle in the middle of the boss, so the bulge does not sit within it. I did find something though. The circle was the perfect size for the horn to press into! Fits perfectly snug. Also remember that this is not actually necessary for wheels like the champion, as it has an outer plate that sits around the horn anyway, holding it in place.
Just for your info, the wheel that I removed said in the middle Nardi Torino and had SUBARU pressed in on the bottom spoke. Hope this helps......
Just for your info, the wheel that I removed said in the middle Nardi Torino and had SUBARU pressed in on the bottom spoke. Hope this helps......
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM