oil press sender
17 February 2004, 07:31 PM
#1
Scooby Regular
Thread Starter
Join Date: Jan 2003
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
oil press sender
does any one know where i can get an oil pressure sender unit.
the type required has two spade connections on .
one is for gauge , the other is for warning light as it is built into sender on this type.
the gauge i have is a Racimex but will change gauge if i have to as well!
the type required has two spade connections on .
one is for gauge , the other is for warning light as it is built into sender on this type.
the gauge i have is a Racimex but will change gauge if i have to as well!
17 February 2004, 07:46 PM
#2
Scooby Regular
Join Date: Jun 2000
Posts: 13,735
Likes: 0
Received 0 Likes
on
0 Posts
Most gauges come with the sender... Racimex is a Dutch brand IIRC, so you may want to try a dutch dealer. The chap I bought my car from may be helpful? gertjan@autovdvelde.nl
25 February 2004, 06:29 PM
#5
problem was no oil warning light at all.
connect spade connector to earth and it lights.
oil pressure gauge reads fine until car warms up .
then at tick over drops off scale below zero . rev till 1300 rpm
and gauge rises.
had car mechanically checked and pressure is fine.
so as sender has switch built into it ,has to be sender.
had e mail from holland saying they can not get them anymore.
connect spade connector to earth and it lights.
oil pressure gauge reads fine until car warms up .
then at tick over drops off scale below zero . rev till 1300 rpm
and gauge rises.
had car mechanically checked and pressure is fine.
so as sender has switch built into it ,has to be sender.
had e mail from holland saying they can not get them anymore.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM