To all Defi Owners
11 January 2004, 09:16 AM
#1
Scooby Regular
Thread Starter
Join Date: May 2003
Posts: 962
Likes: 0
Received 0 Likes
on
0 Posts
I have a few questions re fitting.
1) What's the most common place on a Scooby to mount the boost sensor?
2) Do you need sensor attachment for oil temp/oil pressure sensor?
If so, where's the cheapest, and is there a model number I should quote? Thanks
1) What's the most common place on a Scooby to mount the boost sensor?
2) Do you need sensor attachment for oil temp/oil pressure sensor?
If so, where's the cheapest, and is there a model number I should quote? Thanks
11 January 2004, 11:03 AM
#2
Scooby Regular
Join Date: Oct 2002
Location: north wales
Posts: 1,041
Likes: 0
Received 0 Likes
on
0 Posts
Hi Keigo,
Just waiting to get my Defis from the old man, but i thought you told me that they came with all sensors and attachments, i'm not going to be to happy if i have to be buying fitting attatchments
The boost gauge just fits to a place where there is a blanking tube on the MY99/00 in the middle of the engine.
James.
Just waiting to get my Defis from the old man, but i thought you told me that they came with all sensors and attachments, i'm not going to be to happy if i have to be buying fitting attatchments
The boost gauge just fits to a place where there is a blanking tube on the MY99/00 in the middle of the engine.
James.
11 January 2004, 11:19 AM
#3
Scooby Regular
Thread Starter
Join Date: May 2003
Posts: 962
Likes: 0
Received 0 Likes
on
0 Posts
Hi James,
All senders and leads are included in the package. Just read in the instruction manuals that some cars need sensor attachment for the oil temp and oil pressure, but it's a general manual, so I don't know if that applies to Scooby.
All senders and leads are included in the package. Just read in the instruction manuals that some cars need sensor attachment for the oil temp and oil pressure, but it's a general manual, so I don't know if that applies to Scooby.
11 January 2004, 11:28 AM
#4
The only fitting you need with Defi's, is an adaptor to allow the oil temperature sender to be screwed into the tapping on top of No3 cylinder.
Boost pipe fits onto an unused, blanked with a rubber top, fitting on the front n/s of the manifold, then the SENDER for it can be mounted wherever: mine sits between the battery and the n/s strut top mount.
All wires were fed through the oval grommet on the bulkhead on the n/s, which pops out, had a cross cut in it, wires fed through, and was popped back.
As noted above, gauges come with senders.
For fitting instructions, try www.chiark.co.uk, and the defi site which gives English translations of the Japanese.
Alcazar
Boost pipe fits onto an unused, blanked with a rubber top, fitting on the front n/s of the manifold, then the SENDER for it can be mounted wherever: mine sits between the battery and the n/s strut top mount.
All wires were fed through the oval grommet on the bulkhead on the n/s, which pops out, had a cross cut in it, wires fed through, and was popped back.
As noted above, gauges come with senders.
For fitting instructions, try www.chiark.co.uk, and the defi site which gives English translations of the Japanese.
Alcazar
Trending Topics
11 January 2004, 03:33 PM
#8
Scooby Regular
iTrader: (4)
Join Date: Jun 2003
Location: Scotchland
Posts: 9,200
Likes: 0
Received 0 Likes
on
0 Posts
na, don't buy one. drill a hole in the plug where the allan key fit's into and rethread it for the sensor. tis what i done with mine when i found out i had to buy another plug, but did this instead. works fine
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM