Knocklink is in.
#1
Scooby Senior
Thread Starter
Fitted in and working correctly
I'm getting two solid greens at best. I've redlind it in the first three gears, and that is all i can get
Det free for me
Next project = Defi's
I'm getting two solid greens at best. I've redlind it in the first three gears, and that is all i can get
Det free for me
Next project = Defi's
#2
So what size fuse did you use Brun and did you take the intercooler off to improve access to fit the sensor?. Where did you take your 12V supply from. How long did it take?.
Sorry for all the questions, just looking to see if anyone has come up with a better or easier way of fitting.
Job for next w/e me thinks.
Mark...
Sorry for all the questions, just looking to see if anyone has come up with a better or easier way of fitting.
Job for next w/e me thinks.
Mark...
#3
Scooby Senior
Thread Starter
Went for a 1amp fuse as it was all i could put my hands on at the time.
I didn't take the intercooler off as i found it easier to remove the dumpvalve which is directly above the require bolt.
I got the 12v ignition live from the *** lighter which did prove a bit of a pain. It would have been much easier taking one from the stereo, but im saving that for the Defis.
It took about 3 hours in all including Grand Prix, beer and ****. Cut those out and it would have taken an hour or so.
I didn't take the intercooler off as i found it easier to remove the dumpvalve which is directly above the require bolt.
I got the 12v ignition live from the *** lighter which did prove a bit of a pain. It would have been much easier taking one from the stereo, but im saving that for the Defis.
It took about 3 hours in all including Grand Prix, beer and ****. Cut those out and it would have taken an hour or so.
#4
Cheers Brun, 1A it is then.
Still thinking about putting the LED's in an A pillar pod along with a oil temperature gauge. The new type KnockLink 'gauge' would have looked good in an A pillar pod, glad I didnt wait though - not at twice the price!.
Mark...
Still thinking about putting the LED's in an A pillar pod along with a oil temperature gauge. The new type KnockLink 'gauge' would have looked good in an A pillar pod, glad I didnt wait though - not at twice the price!.
Mark...
Thread
Thread Starter
Forum
Replies
Last Post
blockhead
Subaru Parts
19
07 November 2015 11:50 PM