Fitting Momo gearknob
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Apr 2002
Location: Buckinghamshire
Posts: 1,818
Likes: 0
Received 0 Likes
on
0 Posts
I want to change the OEM gearknob in my MY03 WRX for a Momo air/leather, how easy is it to swap over and anyone know who has the best price on buying one?
Thanks,
Andy.
Thanks,
Andy.
#2
well the standard items unscrews so that's easy enough to remove.
Momo ***** start at £30 and go all the way up to over £50. The nicer ones cost between £45 and £55.
They are supplied with numerous 'lugs' that you put inside the **** allowing a tight fit around the actual gear stick. You'll need to try them to make sure you get the best fit. Do this before inserting it into the ****.
Then using the allen key provide tighten the small allen nuts up holding the **** in place.
IMHO I would also send a further £15 and get the richbrook chrome shaft cover which screws onto the bottom of the gear **** and sits ontop of the gear gaiter. But that's just me........
Hope that helps ;-)
Momo ***** start at £30 and go all the way up to over £50. The nicer ones cost between £45 and £55.
They are supplied with numerous 'lugs' that you put inside the **** allowing a tight fit around the actual gear stick. You'll need to try them to make sure you get the best fit. Do this before inserting it into the ****.
Then using the allen key provide tighten the small allen nuts up holding the **** in place.
IMHO I would also send a further £15 and get the richbrook chrome shaft cover which screws onto the bottom of the gear **** and sits ontop of the gear gaiter. But that's just me........
Hope that helps ;-)
Thread
Thread Starter
Forum
Replies
Last Post
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
blockhead
Subaru Parts
19
07 November 2015 11:50 PM
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM