can everyone post pics of where they choose to fit their knock and lambda links.

I am scratching my head as to where to put the damn things so they are visable. I am thinking of rehousing them tegether to make them smaller and easier on the eye.

 

Admittedly the Knock Link install is a little smarter than the Lambda Link

[Edited by hypoluxa - 5/17/2003 5:16:03 PM]

 

Do a search on Knock Link and Lambda link. I found an interesting one with photos of where to put them, basically on either side of the instrument pod, below the level of the instruments.
Alcazar

 

i stuck me knocklink just to the left of my fog light switch like so


and my AFR i stuck down by the oddment tray just at my right knee like so



cheers

big sinky

 

Have a look on "General Technical" thread called "What should my boost gauge read?"
At least, have a look when Brun posts the photo's for me, as my computer refuses point blank to let me post photo's.:
Alcazar

 

Gedi,

Mine are mounted below the stereo, as per pic below

In having them there they don`t distract you whilst driving at all.
They are also easy to see when u need 2 (during mapping etc)

L8r m9
Pete

 

Here you go

 

Here is a pod I made Myself it contains Knocklink, Daws AFR, Water spray and Scooby ECU Monitor.

 

Can you spot it???

 

Wicked! Got a stealth mode too!

Go on! Show us!!

 

Can you spot it??

Its staring you in the face....

 

I can see it.
It's in the centre dash above the head unit.
Looks very smart.

 

What's the best way to fix a Knocklink display in place (assuming you don't use a special pod)? Double-sided tape? Special adhesive?

 

Brun,

How did you attach them?

 

The pictures Brun put up were my car.....my stupid computer refuses point blank to allow me to post pics[img]images/smilies/mad.gif[/img]

The displays come with double sided tape attached, which lets them fall straight back off, as the wires aren't all that flexible.:

I got round it by warming the d/s tape, and the place I wanted it to stick to with a hot air gun used VERY carefully with frequent finger type checking, then pressed into place, and held for 30 seconds.
They're still there:
Alcazar

 

Cheers. I'll try that then.

 

if you`ve got the facelift classic model the lambdalink will fit in the right hand side (nearest drivers window) air vent, just above where BRUN has his mounted. fits perfectly

[Edited by Abbylad - 6/18/2003 1:08:23 PM]

 

Not mine Tis alcazar's

 

try here