Torbo Gauge Install Question
02 September 2002, 03:07 PM
#1
Scooby Regular
Thread Starter
Join Date: Oct 2001
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
I'm confused. I'm about to install a Turbo Gauge, however I am confused where to tap into to get the boost reading. I've read Chiarks page and can not find the outlet on the top of the manifold ( I have a MY01 WRX)he suggests. Have also looked at the Subaru Install instructions Here but on these instructions it look like you tap into the FPR Page3. Therefore any help (with pics if possible) would be helpful.
Cheers
StuBoy
Cheers
StuBoy
03 September 2002, 07:11 PM
#4
Scooby Regular
Join Date: Nov 2001
Location: uk
Posts: 3,409
Likes: 0
Received 0 Likes
on
0 Posts
when you install the proper subaru kit it says to plumb it in to then pipe that goes from the bov on the intercooler to the manifold. it gives you a t piece and says cut the pipe 50mm from the manifold end and install the t piece. i dont know how accurate the cutting has to be or why that distance but i do as it says and have never had a problem .
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM