window control pod
16 July 2002, 11:17 AM
#1
Scooby Regular
Thread Starter
Join Date: Jun 2002
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
hi,
does anyone know how to get inside the electric window control pod thing on the drivers door, i have a rattle coming from inside, most likely a loose screw but cant get inside to sort it. its a MY94 jap if that makes a difference
does anyone know how to get inside the electric window control pod thing on the drivers door, i have a rattle coming from inside, most likely a loose screw but cant get inside to sort it. its a MY94 jap if that makes a difference
16 July 2002, 11:44 AM
#2
Scooby Regular
Join Date: Apr 2002
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
Yep, had a problem with mine not so long back....
You'll need to remove the door card first :-
- undo one screw inside the door handle (the one you shut the door with from the INSIDE)
- the door card is now only held on by "poppers", gently pull the edge of the card away from the door and you'll feel the "poppers" pull out.
- "un-pop" all of these and lift the door card off making sure that you unplug the few electrical connectors.
- with the door card off you can now undo the four screws which are holding the window switch "pod" in place.
Hope this helps....
Steve
You'll need to remove the door card first :-
- undo one screw inside the door handle (the one you shut the door with from the INSIDE)
- the door card is now only held on by "poppers", gently pull the edge of the card away from the door and you'll feel the "poppers" pull out.
- "un-pop" all of these and lift the door card off making sure that you unplug the few electrical connectors.
- with the door card off you can now undo the four screws which are holding the window switch "pod" in place.
Hope this helps....
Steve
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM