Double din question in bugeye
#1
Scooby Newbie
Thread Starter
Join Date: Jan 2014
Location: Warrington
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Double din question in bugeye
I have a bugeye 2002 that has been fitted with an aftermarket single din unit (really **** one) and a pocket under neath. If i take this am i going to be able to be able to pick up another double din unit and it it straight in or will it need any additional fixings?
#2
Scooby Regular
iTrader: (1)
Join Date: Apr 2005
Location: In the Flatlands of Lincolnshire
Posts: 2,892
Likes: 0
Received 0 Likes
on
0 Posts
You need to carefully pull off the surround and heater controls, there are 6 screws that hold the unit and adaptor in place. Remove them and pull the unit out so you can fit your new unit once connections are swapped.
#3
Scooby Regular
I have just done the same thing on my Hawkeye. The previous owner had done the same thing with single din and pocket. When I came to fit a new double din I found that the original mount plates/screws were missing so I had to source some:
My only problem now is that I need a new surround as the previous owner has cut it to fit it the single din cage
My only problem now is that I need a new surround as the previous owner has cut it to fit it the single din cage
#4
Scooby Regular
iTrader: (1)
Join Date: Apr 2005
Location: In the Flatlands of Lincolnshire
Posts: 2,892
Likes: 0
Received 0 Likes
on
0 Posts
I have just done the same thing on my Hawkeye. The previous owner had done the same thing with single din and pocket. When I came to fit a new double din I found that the original mount plates/screws were missing so I had to source some:
My only problem now is that I need a new surround as the previous owner has cut it to fit it the single din cage
My only problem now is that I need a new surround as the previous owner has cut it to fit it the single din cage
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM