Standard double din radio ???
13 January 2011, 08:07 PM
#4
Scooby Regular
iTrader: (3)
Join Date: Dec 2008
Location: Westhill, Aberdeenshire
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
from memory no.... you have to take a direct feed from the rear speakers....
I was thinking about it but as the standard stereo is pish i'll wire the sub in when i get a new head unit
I was thinking about it but as the standard stereo is pish i'll wire the sub in when i get a new head unit
14 January 2011, 08:17 PM
#5
Scooby Regular
iTrader: (3)
Join Date: Dec 2008
Location: Westhill, Aberdeenshire
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
No need to do it from memory now.... the old unit is out replaced by a nice motorised tv/dvd unit today.
All thats on the back of the Std double din is the normal block connector and the ariel. No other line out's on it!
All thats on the back of the Std double din is the normal block connector and the ariel. No other line out's on it!
Trending Topics
19 January 2011, 09:03 AM
#8
Scooby Regular
iTrader: (3)
Join Date: Dec 2008
Location: Westhill, Aberdeenshire
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
Pop out the cup holder there should be 1 -2 screws holding it in. Undo them and pull the cup holder out of the facia. You can then grab the facia from the top and pull it out, it's held in with clips and comes off fairly easily - you may have to carefully lever the bottom of it but it is easy. The facia can just hang and the stereo is held in with 6 screws.
Easy... it can be removed in under 10 minutes
Easy... it can be removed in under 10 minutes
Thread
Thread Starter
Forum
Replies
Last Post