how to remove o.e stereo
#1
Guest
Posts: n/a
how to remove o.e stereo
can anyone advise me on how to remove the standard o.e stereo from my 04' sti please. also i know i need an iso connector lead. from the searches ive done ive come up with autoleads pc2-44-4. is this correct?
many thanks
dan
many thanks
dan
#2
Dan...check the sticky on this forum - info is there. Just about to start process on my 03 WRX. The lead you mention is correct.
Last edited by Molbyman; 08 January 2009 at 10:09 PM. Reason: incorrect spelling
#3
Scooby Regular
iTrader: (2)
Join Date: Apr 2002
Location: Buckinghamshire
Posts: 1,818
Likes: 0
Received 0 Likes
on
0 Posts
Make sure the blue wire in the car loom is connected to 12v when ignition is on. This is the power feed to the aerial amplifier in the boot for the rear screen aerial. If it doesn't get power you'll get very crap or no radio reception at all.
#5
Scooby Regular
iTrader: (2)
Join Date: Apr 2002
Location: Buckinghamshire
Posts: 1,818
Likes: 0
Received 0 Likes
on
0 Posts
You need to connect it to the wire in the loom which gives power when ignition on, I don't know which colour. If you look you should see the blue wire coming up the car loom when you plug the Autoleads adaptor in I don't think it has a connection in it = no power for the aerial amp.
Trending Topics
#8
To be honest mate, I wouldn't bother doing it yourself.
I had the old unit removed, a new Kenwood DNX5220BT fitted along with the ipod cable, GPS aerial and microphone all routed so you can't see any wires, had the adaptor cable supplied and fitted all for £60.
I thought that was a bargain!
I had the old unit removed, a new Kenwood DNX5220BT fitted along with the ipod cable, GPS aerial and microphone all routed so you can't see any wires, had the adaptor cable supplied and fitted all for £60.
I thought that was a bargain!
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM