bugeyewrx

I know that when you fit a single din HU you need a single din adaptor from subaru . If I'm going to fit a psi3 unit as well do I need two adaptors ? ( possibly a very stupid question )

Also will I need an ariel adaptor to fit a sony HU .

Cheers ,

Martin .

PSI3

Data monitor plugs into the OBD II socket for power, ground and siganl, no other connections are required.
Any problems please feel free to call me.
Simon
01453 793011
07796 992992

PSI3

Re-reading your post do you mean the single DIN pocket, to fill the left over space from the OEM head unit?

Our single DIN monitor is supplied in a subaru OEM single DIN enclosure, if you have a aftermarket headunit the single DIN monitor will fit either above or below the headunit.

Simon

bugeyewrx

Thanks for the reply Simon ,

So the psi3 unit comes with the single din adaptor and I need to buy a second one to fit the HU ?

Martin .

Tone Loc

iTrader: (1)

No adaptors are needed. You need to buy a single din enclosure when replacing the double din HU with a single din otherwise you'd have a big hole below the HU. This hole is filled by the PSI3 unit... so no need for anything else.

Tony.

bugeyewrx

Thanks Tony

Martin