Hi

I'm tying to change the door speakers on a MY94 WRX, Just wondering how to take the Door card of. I have unclipped the bottom of the door card but don't want to tug the top incase it breaks.

An i missing anything or should this just unclip off.

Cheers
Dave

 

On my MY97WRX there was a screw in the arm rest handle, once that was out and the clips un hooked its a matter of pulling the card out a bit at the bottom and sliding the card up of its hangers by the window. Then there is a wiring loom for the electric windows that needs uncliping.

 

cheers,

 

there are two screws, underneath two blankin plates. one is under the armrest handle part, the other is on the armrest a bit further back (almost in the middle of the door...

then as above, pull off thegently and then lift off the window frame... oh, and remover the blanking plate behind the wing mirror. and also, right near the front of the door, is a plug which you have to take out first, just pry behind it using a flat head screwdriver or similar...

 

oh and i forgot to mention the door handle bit. you need to get that off before the door comes off too.

Chiark has a guide on his website, but i cant remember what it is!