Just finnished install:-
Alpine NO33 Navi Din Head unit and 12 disc changer
Pheonix Gold Titanium Ti800.1 mono amp
DLS CA50 multi channel amp
JL12 W6 Sub
Focal Poly Kevlar 165 K2 component fronts
Mission 5 1/4 co-ax rears

Sounds really well and clear apart from how do you guys get any mid bass in front without vibration (how much dynama do you use and where
and can you get a custom sub box yet for the newage

 

I used bout 4 rolls between the two front doors in my my00, couple of rolls in the rear doors, and bout 8 rolls in the boot. Used dynamat extreme.

 

Did you do the whole inside and the inner outside of the door I have done round the speaaker (and the 24mm spacers) and been told just to do the inside of the outside of the door what do you reckon.
TIA
Jamie

 

The buzzing is the plastic sheeting. I removed it from my car and, so far, nothing's fallen apart - after all, the door cards are fully plastic unlike the <MY00, which had some card on the back of the cards.

For dynamat, do the inside of the outer skin of the door as a minimum. It won't stop the rattling, but it will give you more midbass.

 

will you not get water in the doors without the plastic sheeting? and I have no midbass because it has been dialed out because of the buzzing
from the plastic sheeting
Will ordinary sound deadening do or is it worth 8 times more for dynomat (both look the same to me but one has fancy blue writing on it) ?
TIA
Jamie

 

I don't get water anywhere without the sheeting...

Soundproofing varies widely on price, and a little bit on effect. I've used most things, and like the NoiseKiller stuff from Steve the Sound Man.

 

have you a link and how much is it
Jamie