Pioneer stereo (f.a.o chiark)
#1
Scooby Regular
Thread Starter
Join Date: Aug 2003
Location: Teesside
Posts: 1,247
Likes: 0
Received 0 Likes
on
0 Posts
I am trying to fit a pioneer stereo into my MY99 STI 5 and was wondering if I can use screw to hold the stereo into the metal bracket on the car, as I can't see how the "tabs" will hold it in??
Thanks in advance
Thanks in advance
#3
I'm guessing you've got a double DIN in the STI5 at the moment? If so, you need to remove the double DIN, take the plates off the side of the unit, and screw the mounting plates onto the side of the new unit.
Take care with what screws you use: the unit will tell you the max length and thread to use. Don't just ignore that
Take care with what screws you use: the unit will tell you the max length and thread to use. Don't just ignore that
#4
the thread is less crucial than you realise, plus the holes in the unit are in standard locations.
There is easily enough options on the cage on the car to find holes which line up.
You may find you have to remove the stereo surround if it has one.
There is easily enough options on the cage on the car to find holes which line up.
You may find you have to remove the stereo surround if it has one.
#6
Scooby Regular
Thread Starter
Join Date: Aug 2003
Location: Teesside
Posts: 1,247
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for all the help ppl now just wondering what thread the screws will be on the head unit and where i would be able to get some?? I have fitted the pocket already. so it's now a single DIN hole.
Trending Topics
#8
Scooby Regular
Thread Starter
Join Date: Aug 2003
Location: Teesside
Posts: 1,247
Likes: 0
Received 0 Likes
on
0 Posts
Thanks the HU has a 6mm max stamp on it but no indication of thread size, do you think my local i.c.e shop would stock such a thing?
Thanks Chris
Thanks Chris
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM