ed_the_duck

ok on to the rear speakers.....whats involved in removing the rear panel to get at the speakers?

ed_the_duck

?anyone

C-WRX

ETD,

The rear seats and 1 of the seat belts had to come out on my 94 wrx,even then the shelf still needs some bending to get it to move.

chiark

What year?

Dave_A

Why do you wish to remove the shelf?

Yuo should be able to lift off the grills from the top of the speakers, giving you access to the screws holding the speakers in. The back one requires either a short screwdriver, or a ratchet with a phillips-head to remove it. The speaker then drops out into the boot. If you are fitting larger speakers back in place, its easier to fabricate a baffle out of mdf which you can then screw into the the parcel shelf using the original speaker screw holes. You then fit your new speak to the baffle, from underneath.

You need to be careful that any baffle you do make doesn;t foul the metal runner bars that run along the length of the boot lid, but other than that, its a pretty straight forward job.

if you need any further help, don't hesitate to ask.

Dave