Amp advice please
#1
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: the middle bit
Posts: 8,238
Likes: 0
Received 0 Likes
on
0 Posts
Right i've pretty much decided/bort most of the ICE i'm guna get but am a tad lost with which amp i'm guna need.
Basic needs r for a 4 channel amp for the front infinity 60.5's which i believe do the 4 ohm thing as well as bridging the other 2 channels 2 power the pair of subs i have now bort in a thread not too far from here In current form they r wired in series for a bridged channel @ 2ohms. Sure they can be redun in parallel for 4 ohms but it'd b preferable to get an amp that'll run 2 ohm with 2 channels bridged
Realistically i'm looking at sub £200 type expense but was havin trubble finding da info which says wot most amps run at when bridged etc From wot i can c Kenwood uns r ok with 2 ohms but still not sure about at exactly wot point they can do 2 ohms & also with their 5 channel uns wot the score is with da ohmage, also saw Infinity RA5004 is "stable with 2 ohm speaker leads" but again little unclear on wot fit the bill.
So 4 channels (2 x 4ohm for front speakers & 2 bridged @ 2 ohms for da subs) & not too expensive (yes i no u get wot u pay 4, etc etc) amp. So any suggestions PLEASE
Any cunning plans will b gr8fully received
Si
PS shud b final question then the newb will b 2 busy deafening himself All going well
[Edited by scooby_si - 8/28/2002 10:58:53 PM]
Basic needs r for a 4 channel amp for the front infinity 60.5's which i believe do the 4 ohm thing as well as bridging the other 2 channels 2 power the pair of subs i have now bort in a thread not too far from here In current form they r wired in series for a bridged channel @ 2ohms. Sure they can be redun in parallel for 4 ohms but it'd b preferable to get an amp that'll run 2 ohm with 2 channels bridged
Realistically i'm looking at sub £200 type expense but was havin trubble finding da info which says wot most amps run at when bridged etc From wot i can c Kenwood uns r ok with 2 ohms but still not sure about at exactly wot point they can do 2 ohms & also with their 5 channel uns wot the score is with da ohmage, also saw Infinity RA5004 is "stable with 2 ohm speaker leads" but again little unclear on wot fit the bill.
So 4 channels (2 x 4ohm for front speakers & 2 bridged @ 2 ohms for da subs) & not too expensive (yes i no u get wot u pay 4, etc etc) amp. So any suggestions PLEASE
Any cunning plans will b gr8fully received
Si
PS shud b final question then the newb will b 2 busy deafening himself All going well
[Edited by scooby_si - 8/28/2002 10:58:53 PM]
#4
Scooby Regular
Join Date: May 2001
Location: Surrey Somewhere, From 341 bhp '99 STI V to '98 Merc CLK & '00 Peugeot 306 XSI to '01 E46 M3 :)
Posts: 3,301
Likes: 0
Received 0 Likes
on
0 Posts
Theres some here, dont know the company tho but it may help
http://home.btconnect.com/AUTOTRONIC...liburamps.html
or
http://www.dp-motorsport.co.uk/audio...er/caliber.htm
http://home.btconnect.com/AUTOTRONIC...liburamps.html
or
http://www.dp-motorsport.co.uk/audio...er/caliber.htm
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM