**AXIS RACING GB**
26 June 2007, 07:46 PM
#1
Former Sponsor
Thread Starter
Join Date: Dec 2005
Location: 10.68 QT mile in 2007 2.33 Type R ** Current 2002 Spec C 2.33 Track prepped.
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
**AXIS RACING GB**
****AXIS RACING GROUP BUY****
As a few people have showed good interest in the original group buy, I have decided to get it back up and running.
This is a group buy for primarily 2.5lt short motors built and supplied by axis power racing in the states. There are various options available depending on your goals and usage of the motors. I have listed the most popular options below, the prices quoted include basic shipping however final numbers and methods need to be confirmed before shipping is finalized so allow for some movement in price, for now it is based on $250 per unit. The prices include vat at 17.5% and import tax at 7%
Gaskets and head bolts can also be supplied with the motors.
*PRICES*
Standard 2.5 USDM = Ј1171 GBP
Stage 2 = Ј1444 GBP
Stage 3 = Ј2451
*The above prices are based on 10 or more units being sold.*
Payment will be paid direct to axis power racing and Remember shipping needs to be confirmed before the above prices are 100%
Stage 2 Components:
- 2.5 L STi Semi-Closed Deck Shortblock
- Standard Sleeve Liners
- Standard 2.5L STi Forged Crankshaft - Standard 2.5L STi Forged Connecting Rods - Axis Racing/CP Forged Pistons - 7000 Rev Limit Recommended
Stage 3 Components:
- 2.5 L STi Semi-Closed Deck Shortblock
- Standard Sleeve Liners
- Modified Axis Racing Forged Crankshaft - Polished & Balanced to 10,000 RPMS - Pauter 4340 Chrome-Moly Forged Rods - Axis Racing/CP Forged Pistons With Swain Tech Coatings - 8500 Rev Limit Recommended
ARP head studs $199
As a few people have showed good interest in the original group buy, I have decided to get it back up and running.
This is a group buy for primarily 2.5lt short motors built and supplied by axis power racing in the states. There are various options available depending on your goals and usage of the motors. I have listed the most popular options below, the prices quoted include basic shipping however final numbers and methods need to be confirmed before shipping is finalized so allow for some movement in price, for now it is based on $250 per unit. The prices include vat at 17.5% and import tax at 7%
Gaskets and head bolts can also be supplied with the motors.
*PRICES*
Standard 2.5 USDM = Ј1171 GBP
Stage 2 = Ј1444 GBP
Stage 3 = Ј2451
*The above prices are based on 10 or more units being sold.*
Payment will be paid direct to axis power racing and Remember shipping needs to be confirmed before the above prices are 100%
Stage 2 Components:
- 2.5 L STi Semi-Closed Deck Shortblock
- Standard Sleeve Liners
- Standard 2.5L STi Forged Crankshaft - Standard 2.5L STi Forged Connecting Rods - Axis Racing/CP Forged Pistons - 7000 Rev Limit Recommended
Stage 3 Components:
- 2.5 L STi Semi-Closed Deck Shortblock
- Standard Sleeve Liners
- Modified Axis Racing Forged Crankshaft - Polished & Balanced to 10,000 RPMS - Pauter 4340 Chrome-Moly Forged Rods - Axis Racing/CP Forged Pistons With Swain Tech Coatings - 8500 Rev Limit Recommended
ARP head studs $199
Last edited by Slowboy Racing; 28 June 2007 at 06:19 PM. Reason: Adding items
27 June 2007, 07:36 PM
#6
Former Sponsor
Thread Starter
Join Date: Dec 2005
Location: 10.68 QT mile in 2007 2.33 Type R ** Current 2002 Spec C 2.33 Track prepped.
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
The stage 2 blocks are standard Subaru units all that is changed is the pistons, crank, bearings etc remain the same. If needed bearings can be changed, but you would probably be better of going for the stage 3 unit.
28 June 2007, 08:24 AM
#7
Former Sponsor
Thread Starter
Join Date: Dec 2005
Location: 10.68 QT mile in 2007 2.33 Type R ** Current 2002 Spec C 2.33 Track prepped.
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
Stage four motors can be built but you will have to find the ej22 block and have this sent to Axis. I can confirm prices on this if there is interest.
Trending Topics
28 June 2007, 05:48 PM
#10
Former Sponsor
Thread Starter
Join Date: Dec 2005
Location: 10.68 QT mile in 2007 2.33 Type R ** Current 2002 Spec C 2.33 Track prepped.
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
You mean ACL bearings and ARP head studs ?
What power are you hoping to run and boost ?
To split the block to fit the ACL bearings and have the crank polished and balanced etc you are looking at $800
What power are you hoping to run and boost ?
To split the block to fit the ACL bearings and have the crank polished and balanced etc you are looking at $800
29 June 2007, 10:12 PM
#14
Former Sponsor
Thread Starter
Join Date: Dec 2005
Location: 10.68 QT mile in 2007 2.33 Type R ** Current 2002 Spec C 2.33 Track prepped.
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
1) h4rry = 1X Stage 2
2) WUZ - Stage 2 ( for a little project I have in mind
)
3)dougwrx= stage 3
2) WUZ - Stage 2 ( for a little project I have in mind
)3)dougwrx= stage 3
30 June 2007, 08:49 PM
#15
Former Sponsor
Thread Starter
Join Date: Dec 2005
Location: 10.68 QT mile in 2007 2.33 Type R ** Current 2002 Spec C 2.33 Track prepped.
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
Even if the numbers get only to five units that’s good enough for an order, I will confirm the prices but i would expect $100 on the stage 2 prices if we don’t make the numbers ?
Bear in mind the standard 2.5 here is around £300-£400 cheaper than most UK prices and its limited to this group buy.
Grab a bargain
Bear in mind the standard 2.5 here is around £300-£400 cheaper than most UK prices and its limited to this group buy.
Grab a bargain
02 July 2007, 06:03 PM
#23
Former Sponsor
Thread Starter
Join Date: Dec 2005
Location: 10.68 QT mile in 2007 2.33 Type R ** Current 2002 Spec C 2.33 Track prepped.
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
Stage 3 should be good for around 450-500 going on similar uk spec cars and the stage 2 around 400.
02 July 2007, 06:52 PM
#24
Scooby Regular
iTrader: (3)
Join Date: May 2006
Location: Wrexham
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
I have spoke to my tuner, and he thinks that with the stage 2 and supporting mods (MD321T turbo, FMIC, 740cc injectors, fuel pump, exhaust system and decent remap) i will be looking between 420 & 480 BHP. Hope this helps.
02 July 2007, 06:57 PM
#25
Scooby Regular
iTrader: (41)
Join Date: Nov 2003
Location: in the woods...........555 Wagon Sqn
Posts: 13,347
Received 55 Likes
on
42 Posts
1) h4rry = 1X Stage 2
2) WUZ - Stage 2 ( for a little project I have in mind)
3)dougwrx= stage 3
2)trails - stage 2 (and the ARP studs), please
it would be rude not too
2) WUZ - Stage 2 ( for a little project I have in mind
)3)dougwrx= stage 3
2)trails - stage 2 (and the ARP studs), please
it would be rude not too
03 July 2007, 11:18 PM
#28
Scooby Regular
iTrader: (14)
Join Date: Aug 2005
Location: East Barnet/southgate on the borders of North London and Hertfordshire
Posts: 1,088
Likes: 0
Received 0 Likes
on
0 Posts
Im sorry for misunderstanding... but if i was to want a bog standard 2.5 does that mean i would be paying £1200ish and that with it being delivered to my door ??
04 July 2007, 07:26 AM
#29
Former Sponsor
Thread Starter
Join Date: Dec 2005
Location: 10.68 QT mile in 2007 2.33 Type R ** Current 2002 Spec C 2.33 Track prepped.
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
Yes thats pritty much it, once we no how many people want the motors we can work out the best shipping method and get the best prices on those numbers. I woudlnt expect it to come in any higher than £1200 to your door.
