wrx bugeye ecu remap??
hi all, can you remap the standard ecu on a 2001 bugeye wrx, im after getting my car running the best it can and get the best bhp for what ive done so far, it has a full s/s 3" exhaust, walbro 255 fuel pump, k&n panel filter and ill be swapping the standard intercooler for the sti one, the exhaust is cat back so should i get it decatted and change the down pipe and manifolds before mapping or will it not make much difference?
with those done what should i expect power wise? Hope that makes sense cheers
with those done what should i expect power wise? Hope that makes sense cheers
Yes you can remap the newage wrx. Racedynamix can do it (on here)
Sound like your going for 350+Bhp lol!,unfortunately your only gonna get 270-280bhp with the standard Td04 that i assume you have. If you want more power need an STI VF turbo or Td05 for example.
If you decat may have a problem MOT time, otherwise a sports cat downpipe is a good half-way house which will only drop the power by a few percent.
Phi
Sound like your going for 350+Bhp lol!,unfortunately your only gonna get 270-280bhp with the standard Td04 that i assume you have. If you want more power need an STI VF turbo or Td05 for example.
If you decat may have a problem MOT time, otherwise a sports cat downpipe is a good half-way house which will only drop the power by a few percent.
Phi
Last edited by PhilWrx100; Mar 5, 2014 at 06:52 PM.
The Td05 would be fine. Alot of guys have no problems running 350bhp,, but it can be a stain on their gearbox/clutch and they can have a shorter life because of it. The engine should be fine. Others on here will be able to give you the full load down
Phil
Phil
Thread
Thread Starter
Forum
Replies
Last Post




