ej20 from 1998 impreza sport into 2001 sport special
#2
Scooby Regular
I wouldn't bother as the MY1998 will have 115bhp and that's less that the engine that was already in it - a 2.5 ltr legacy engine is a popular upgrade though - it would have to be from a MY2000 and not a 2001 as the loom may need to be swapped over as well.
Hope it helps.
Andy
Hope it helps.
Andy
Last edited by dark_angel; 17 February 2014 at 07:02 PM.
#5
re
this is what i thought but the engine is different in my original engine the spark plugs sit the cylinder in the new one the plugs go in the rocker cover diferent dephs also diferernt wiring loom my question is this how do i get it all to fit as i have 2 engine now my original is hydrolocked and the new one is rong year :/
Trending Topics
#8
Scooby Regular
iTrader: (1)
In most cases, water ingress into the cylinders will bend a con-rod or damage a piston.
If it was my engine, I would pull the old heads off and check the condition of the valves and chambers - you can pour paraffin down the inlet and exhaust ports to see if the valves are sealing and take it from there.
Mick
If it was my engine, I would pull the old heads off and check the condition of the valves and chambers - you can pour paraffin down the inlet and exhaust ports to see if the valves are sealing and take it from there.
Mick
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM