m_reed

iTrader: (1)

As above really had the car 5 years got the alarm fitted straight away and had no bother with it but just moved house and my car fob lights up put new batterys in it to make sure but wont turn alarm or imobiliser off searched house high and lower for my other fob and valet number but looks like i lost it in the move

any tip ect to get fob working ect were is the reciever for fob in the car could that of went faulty? even charged up car battery to make sure that is tip top but fob wont work any help would be brill.

cheers mark

TonyBurns

iTrader: (3)

You need a clifford dealer really, what is your general location??

m_reed

iTrader: (1)

live in Thornaby Teesside, can a fob loose memory? if so can it be re programmed lol cheers

Wyorksautoectrical

Hi mate, you say you have moved house, this might sound stupid but I have seen some of the old model Clifford alarm fobs and also even some of the new Lexus cars where the remotes have gone off when they have been in close range of a satellite dish on the house.
If not you will have to take it to a Clifford dealer. If its that old I would get a complete new system fit.

m_reed

iTrader: (1)

there is a satellite not far from the car like lol but was in the old house, didnt realise an alarm goes out a date didnt realise i had to get a new one fitted 5 years doen the line cost abit in the first place lol. if the other fob doesnt turn up will have to go back to were i got it fitted in the first place, cheers mate

albob

"..any tip ect to get fob working ect were is the receiver..."

I have a concept 300, and if I park in the local B&Q my fob will not unlock car. The receiver/aerial is (on mine..) just along the windscreen rubber, drivers side (about eye-level height as you sit in car). I put the fob as close as I can to this point to get it to unlock : or place the fob under my chin and stand as close as I can to this point (I know, it sound daft, but seems to work)

m_reed

iTrader: (1)

well tried the chin thing and no didnt work lol, also noticed proximitery sensor not working

360ste

iTrader: (1)

Another wild suggestion. A few years ago my Clifford 600 alarm would not respond when in the garage or on the drive. Entered the pin and went for a drive alarm was okay even parked next to our local phone mast. Came home did not work, found that a remote for the conservatory fan in the house had a book on top of it so was over powering the fob signal. Do you have any other remotes that are radio not Infa Red?
My alarm was fitted 10 years ago and still going strong. I don't think the thread is meaning your alarm is out of date just that if there is a problem you may not be able to get it repaired so replacement will be the only option.

m_reed

iTrader: (1)

wish i could find my folder with spare fob and valet code probs solve problem, thanks for info mate looks like its going to cost money will have to wait until wife goes back to work lol