Cam belt choice hawkeye
#1
Scooby Regular
Thread Starter
Join Date: Aug 2012
Location: Norwich
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Cam belt choice hawkeye
Hi guys my 2.5 could do with a new cam belt.Was done 15000miles ago 2 1/2 years ago but the garage checked the belt the other day and said the belt is frayed only very slightly in a couple of places.So with peace of mind they advised me just to change the belt so what make of belts do you recomend and were to buy from ie group buys etc thanks shaun
#2
If it is the same garage that done the belt, tell them to replace free of charge. The belt should last 4 years / 50,000 miles and look like new when its removed, it is changed as a precaution at 50,000 miles. It sounds as if they have skimped on pulleys or tenisioner and or ill fitted the belt gaurd too close to the belt.
I would not be impressed if it was me after 15,000 miles, also question why the removed the belt covers if its not even a third of the way through it life span.
I would not be impressed if it was me after 15,000 miles, also question why the removed the belt covers if its not even a third of the way through it life span.
#3
Scooby Regular
Thread Starter
Join Date: Aug 2012
Location: Norwich
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Hi bud thanks for your reply.A few days ago my eml came on with code p0021 A camshaft position .So they were worried about the cam belt skipping a tooth or two so removed the cover to check and that was what they saw.The belt was fitted by a garage in wales before i brought the car 2 yrs ago so dont think ive got leg to stand on..........
#4
Not so good, personally I would go for the subaru belt kit with tensioner etc , as above should be worry free if fitted correct for 50,000 miles/5 years. I think my cambelt service at 50,000 miles was about £600(subaru dealer).
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM