In the process of fitting an aftermarket billet fuel filter on my bug wagon can anyone tell me which pipe supplies the filter from the fuel tank and which is the return from the photo below? There are 3 pipes, a blue a black and a grey. The original filter was removed prior to my forged engine being lifted in so I can't identify the pipes. Also i believe one is the breather? The grey pipe has an inline disc I think it's a non return valve? I'm assuming it's the return to tank?

Thanks

 

Just changed mind not long ago but can't remember off hand which is which, will have a look for you if no one posts shortly, absolutely pissing it down atm though!

 

Ok cheers, typical Scottish weather, sunny here in Manchester!

 

Anyone help?

 

Will try and get some pics up shortly iPhone permitting..

The bottom black pipe is the feed from the tank I believe, blue is a bleed off (correct me if I'm wrong anyone) and the grey is the return to the tank.

 

Cheers a pic would be great, and if anyone else could confirm too cheers.

 

[IMG][/IMG]



The bottom black pipe goes to the filter running just out of view, the top grey pipe has the relief valve/disc on it and the blue pipe is a smaller diameter tubing which I assume is the leak off/bleed line what ever it is.

Hope this is of some help!

 

Many thanks for that ill follow the pipes back now and figure it out. Cheers fella!

 

No worries!

 

Ok I've identified the bottom pipe as the fuel feed but still unsure between the grey and the blue which is the return fuel to tank and which is the breather if anyone could identify cheers.

 

Anyone assist? Thanks

 

Grey is fuel return line
Blue breather
Black is fuel feed